RX-E100RSL/RX-E100RSB
1-4
Prior to performing the following procedure, remove
the top cover and the rear panel.
Cut off the tie band fixing the harness.
Disconnect the tuner board and DSP board from
connector CN111,CN112 and CN681 on the each
Relay board.
Disconnect the Relay board from connector CN503,
CN504 and CN501 on the audio board.
Disconnect the card wire connected to connector
CN412 and CN512 on the Input board.
1.
2.
3.
4.
Removing each board connected to the
rear side of the audio board
(See Fig.5 to 7)
Fig.5
Fig.6
Fig.7
DSP
board
Input
board
Tuner
board
DSP board
CN111
CN111
CN112
CN681
CN512
CN503
CN504
CN412
CN512
Relay
board
CN412
CN501
Relay
board
Tuner
board
CN681
CN112
Input
board