1-12 (No.MB383)
3.1.15 Removing the volume board
(See Fig.11)
• Remove the top cover and front video board.
(1) From the back side of the main body, remove the five
screws
Q
attaching the volume board to the rear panel.
(2) Remove the screw
R
attaching the volume board.
(3) From the top side of the main body, remove the two screws
S
attaching the wire holder board and move the wire holder
board with the wires in the direction of the arrow.
(4) Disconnect the volume board from the DSP connect board
while releasing the claw
h
of the connector
CN681
on the
volume board.
Note:
When releasing the claw
h
, take care not to break it.
(5) Take out the volume board and disconnect the wires from
the connectors (
CN661
,
CN682
,
CN683
) on the forward
side of the volume board.
Fig.11
R
Wire holder board
CN661
CN683
CN682
S
CN681
h
DSP connect
board
Q
Rear panel
Volume
board
Volume board
Summary of Contents for RX-D301S
Page 23: ... M E M O ...
