44
Storing the Preset Stations
(Also see page 23)
1. Press MENU.
The MENU appears on the TV.
• Pressing one of the
5
/
∞
/
2
/
3
buttons also displays the
MENU.
2. Press
5
/
∞
to move
to “TUNER
CONTROL,” then press
2
/
3
.
The TUNER CONTROL menu appears.
3. Tune into a station on the TUNER CONTROL
menu, referring to “Operating the Tuner”.
4. Press
5
/
∞
to move
to “PRESET
MEMORY,” then press
2
/
3
.
moves to “PRESET CH”
and the channel number starts
flashing.
5. Press
2
/
3
to select a preset station number you
want.
6. Press SET to store the setting.
The selected channel number stops flashing.
7. When you finish, press EXIT repeatedly until the
menu disappears from the TV.
Setting the Basic Setting Items
(Also see pages 17 – 22)
1. Press MENU.
The MENU appears on the TV.
• Pressing one of the
5
/
∞
/
2
/
3
buttons also displays the
MENU.
2. Press
5
/
∞
to move
to “SETTING,”
then press
2
/
3
.
The SETTING 1 appears.
3. Press
5
/
∞
to move
to the item you want to
set or adjust, then press
2
/
3
.
• To go to the SETTING 2
menu, move
to “NEXT
PAGE,” then press
2
/
3
.
• To go back to the SETTING
1 menu, move
to
“PREVIOUS PAGE,” then
press
2
/
3
.
On the SETTING 1 and 2
menus, you can do the
following:
SETTING 1 menu
“SUBWOOFER”:
Set the subwoofer information (see
page 17).
“FRONT SPK”:
Set the front speaker information (see
page 17).
“CENTER SPK”:
Set the center speaker information (see
page 17).
“REAR SPK”:
Set the rear speaker information (see
page 17).
“CNTR DELAY”:
Adjust the delay time of the center
speaker output (see page 18). *
“REAR DELAY”:
Adjust the delay time of the rear
speaker output (see page 18). **
“CROSSOVER”:
Set the crossover frequency
(see page 18).
“ONE TOUCH OPR”: Set the one touch operation
(see page 22).
SETTING 2 menu
“DIGITAL 1/2/3/4”: Set the digital input terminal 1/2/3/4
(see page 19).
“LFE ATT”:
Set the low frequency effect attenuator
level (see page 19).
“FL DISPLAY”:
Shows the disc text information on the
display (see page 22).
Notes:
*
You cannot select “CNTR DELAY” when “CTR SPK” is set to
“NONE” (see page 17).
**
You cannot select “REAR DELAY” when “REAR SPK” is set to
“NONE” (see page 17).
4. When you finish, press EXIT repeatedly until the
menu disappears from the TV.
You can show the RDS information on the TV screen.
For details, see page 25.
EN40_50.RX-8010&8012R_f
01.3.19, 1:59 PM
44
