JVC RX-772VBK, Instructions Manual

Page: 28 / 54

Page 25
3. Press SURROUND ADJUST so that the Control
% % % % %
/
fi fi fi fi fi
/
@ @ @ @ @
/
# # # # #
buttons work for the surround
settings.
The lamp next to the button lights up.
4. Press Control
% % % % %
/
fi fi fi fi fi
until “– REAR +” appears on the display.
5. Press Control
@ @
@ @
@
/
# #
# #
#
to adjust the rear speaker output level.
• Pressing Control
@
decreases the output level up to –10 dB.
• Pressing Control
#
increases the output level up to +10 dB.
6. Press Control
% % % % %
/
fi fi fi fi fi
until “–DELAY +” appears on the display.
7. Press Control
@ @ @ @ @
/
# # # # #
to adjust the delay time of the rear speaker output.
Each time you press the button, the delay time changes as follows:
DELAY 1: Select this when the distance from you to your rear speakers is greater than that to the
front speakers.
DELAY 2: Select this when the distance from you to your rear speakers is almost equal to that to the
front speakers.
DELAY 3: Select this when the distance from you to your rear speakers is a little less than that to the
front speakers.
DELAY 4: Select this when the distance from you to your rear speakers is much less than that to the
front speakers.
To cancel the Hall surround, press Control
%
/
fi
until “SURR OFF” appears in step 2. The HALL and
SURROUND indicators go off.
From the remote control:
1. Press SOUND CONTROL.
The remote control is activated for adjusting the sound.
2. Press SURR MODE until “HALL” appears on the display.
The HALL and SURROUND indicators also light up on the display.
Each time you press the button, the surround modes change as follows (the indicator of the selected
surround mode also lights up on the display):
3. Press REAR +/– to adjust the rear speaker output level.
• Pressing REAR – decreases the output level up to –10 dB.
• Pressing REAR + increases the output level up to +10 dB.
4. Press DELAY to adjust the delay time of the rear speaker output.
Each time you press the button, the delay time changes as follows:
To cancel the Hall Surround, press SURR MODE until “SURR OFF” appears in step 2. The HALL and
SURROUND indicators go off.
SURROUND
ADJUST
Front panel
DELAY 1
DELAY 2
DELAY 4
DELAY 3
SOUND
CONTROL
+10
SURR MODE
100+
PROLOGIC 3CHLOGIC
SURR OFF
HALL
DELAY 1
DELAY 2
DELAY 4
DELAY 3
(Surround Off)
REAR
5 6
DELAY
1
Remote Control
RX-772VBK[J]_0052-001A.En.24-30 97.4.8, 3:25 PM 25