25
1DVD 2CD
3TV
“
1DVD 2CD
3CDR
“
1DVD 2CD
3VCR
“
1DVD 2TV
3CDR
“
1DVD 2TV
3VCR
“
1DVD 2CDR 3VCR
“
1CD
2DVD 3TV
“
1CD
2DVD 3CDR
“
1CD
2DVD 3VCR
“
1CD
2TV
3CDR
“
1CD
2TV
3VCR
“
1CD
2CDR 3VCR
“
1TV
2DVD 3CD
“
1TV
2DVD 3CDR
“
1TV
2DVD 3VCR
“
1TV
2CD
3CDR
“
1TV
2CD
3VCR
“
1TV
2CDR 3VCR
“
1CDR 2DVD 3CD
“
1CDR 2DVD 3TV
“
1CDR 2DVD 3VCR
“
1CDR 2CD
3TV
“
1CDR 2CD
3VCR
“
1CDR 2TV
3VCR
“
1VCR 2DVD 3CD
“
1VCR 2DVD 3TV
“
1VCR 2DVD 3CDR
“
1VCR 2CD
3TV
“
1VCR 2CD
3CDR
“
1VCR 2TV
3CDR
“
(back to the beginning)
Notes:
• This function does not take effect in the following cases:
– While playing an analog source,
– While selecting any of DSP modes (see page 31), or one of the
fixed digital input mode—“DOLBY DIGITAL” or “DTS
SURROUND” (see page 14), and
– While listening with the headphones—“HEADPHONE” or
“3D H PHONE” (see pages 13 and 29).
• If you select another Surround mode or DSP mode (or deactivate
the Surround/DSP mode) manually, Auto Surround, if in use, will be
canceled temporarily for the currently selected source.
Auto Surround setting will be restored in the following cases:
– When you turn the receiver off and on,
– When you change the source,
– When you change the analog/digital input, and
– When you select “AUTO SURR ON” again.
¶
Virtual Surround Back
—VIRTUAL SBACK
You can enjoy the surround back channel while playing back
Dolby Digital Surround EX software or DTS-ES software
without the surround back speakers. This function creates the
great surround effect from the behind as if you have connected
the surround back speakers.
Select “VRTL SB ON” to activate Virtual Surround Back.
VRTL SB
ON:
While you play Dolby Digital Surround EX
software or DTS-ES software, the VIRTUAL SB
(Surround Back) indicator lights up.
VRTL SB OFF:
Select to deactivate Virtual Surround Back.
Notes:
• When you have set “NONE” for “SURR SPEAKERS,” this function is
not available.
• While playing back DTS-ES Matrix software with DTS 96/24, DTS
96/24 processing will not be performed with Virtual Surround Back
activated. To apply the processing, deactivate Virtual Surround
Back.
• Virtual Surround Back may not be applied to some software.
Setting the Digital Input Terminals
When you use the digital input terminals, register which components
you have connected to the digital input terminals.
¶
Digital Input terminal
—DIGITAL IN
Set the components connected to the digital terminals.
• As you rotate MULTI JOG, the digital input terminals are set
to used for the following digital components:
21-25_6042[B]0.p65
04.12.23, 4:06 PM
25
