JVC RX-6010VBK Instructions Manual Download Page 23

Page: 23 / 36

Available DSP Modes According to the Speaker Arrangement

Available DSP modes will vary depending on how many speakers are used with this receiver.
Make sure that you have set the speaker information correctly (see page 12).

Speaker arrangements

Available DSP modes

Front

speaker

Front

speaker

Rear

speaker

Rear

speaker

Center speaker

Front

speaker

Front

speaker

Rear

speaker

Rear

speaker

Front

speaker

Center speaker

Front

speaker

Each time you press DSP MODE on the front panel or SURROUND MODE on
the remote control, the DSP modes change as follows:

By pressing DSP MODE:

• THEATER
• LIVE CLUB
• DANCE CLUB
• HALL
• PAVILION
• DSP OFF (DSP mode is canceled)

By pressing SURROUND MODE:

• SURROUND ON

(DOLBY PRO LOGIC, DOLBY
DIGITAL, or DTS SURROUND)

• THEATER
• LIVE CLUB
• DANCE CLUB
• HALL
• PAVILION
• DSP OFF (DSP mode is canceled)

Each time you press DSP MODE on the front panel or SURROUND MODE on
the remote control, the DSP modes change as follows:

By pressing DSP MODE:

• THEATER
• DSP OFF (DSP mode is canceled)

By pressing SURROUND MODE:

• SURROUND ON

(DOLBY PRO LOGIC, DOLBY
DIGITAL, or DTS SURROUND)

• DSP OFF (DSP mode is canceled)

To activate the Surround
mode,

you can also press

SURROUND on the remote
control.

To activate the Surround
mode,

press SURROUND ON/

OFF on the front panel.

To activate the Surround
mode,

you can also press

SURROUND on the remote
control.

To activate the Surround
mode,

press SURROUND ON/

OFF on the front panel.

EN18_24.RX-6010&6018V[J]_f

00.12.5, 1:58 PM

Summary of Contents for RX-6010VBK





































Search results

Summary of Contents for RX-6010VBK

Reviews:

Related manuals for RX-6010VBK

Brands by name

Popular brands

JVC RX-6010VBK, Instructions Manual

Search results

Summary of Contents for RX-6010VBK

Reviews:

Related manuals for RX-6010VBK

Brands by name

Popular brands