10
NOTE
• About two hours after you disconnect the
AC power cord, the set time will be reset.
• When the power is supplied through the
batteries, the clock does not appear on the
display when the System is turned off.
Getting started
To adjust the volume
You can adjust the volume level between MIN,
1 to 29, MAX.
To adjust the super woofer volume
You can adjust the super woofer volume level
between BASS 1 and BASS 6.
NOTE
If you have adjusted the distortion effect
before, press and hold
7
to change to super
woofer volume adjustment (page 22).
Basic operations
Main unit
Remote control
Main unit
Remote control
Turning on the System
Press STANDBY/ON
.
The STANDBY lamp goes off.
Press the button again to turn off the System.
NOTE
When the power is supplied using the
batteries, the System is turned on by pressing
or source buttons on the main unit. You
cannot turn on the System using the remote
control.
Setting the Clock
1. Press CLOCK/TIMER repeatedly* to
select the clock.
AM 12:00
CLOCK
When setting for the first time, press CLOCK/
*
TIMER once.
2. Press UP or DOWN to adjust the hour.
• When you press and hold the button,
the hour digit changes continuously.
3. Press
SET.
4. Repeat 2 and 3 to adjust the minute.
• To go back to the hour setting, press
CANCEL.
Displaying the clock
Press DISPLAY.
• Each time you press the button, the
clock and normal indicator changes
alternately.
RV-NB90̲J.indd 10
RV-NB90̲J.indd 10
12.4.16 2:08:10 PM
12.4.16 2:08:10 PM
