JVC RV-DP200 Instructions Manual Download Page 14

Page: 14 / 62

To Select a Track —————————

During playback, press the

button to select the track you

want.
The selected track starts playing.
•

Press the

button once to skip to the beginning of the next

track.

•

Press the

button to skip to the beginning of the track being

played. Press the

button twice quickly to skip to the begin-

ning of the previous track.

You can also select a track in Stop mode with the same buttons.
When the button is pressed, the selected track and its playback time
appear on the display. To play the CD after selecting a track, just
press the CD

button.

Search Play

————————————

Holding down the

button, during playback, will fast for-

ward/backwards the CD so you can quickly find a particular pas-
sage in the track you are listening to. During Search Play, you can
hear the sound of approx. one forth level.

You can program the playing order of the tracks

using the Re-

mote Control.

■

You can program up to 20 tracks in any desired order including
the same tracks.

■

You can only make a program when the CD Player is stopped.

■

1. Set a CD.

■

2. Press the CD

button.

■

3. Press the

button to stop the CD.

■

4. Press the PROGRAM button.

The System enters the programming mode and the
"PROGRAM" indicator lights up.

■

5. Press the number keys to select the track

to program.

To select the track 5, press 5.
To select the track 15, press +10 then 5.
To select the track 20, press +10 once then press 10.

Example:

for track 2, press 2.

■

6. Repeat step 5 to select the other tracks for

the program.

You can see the total playback time of the programmed tracks
on the display.
•

To cancel the last track programmed, press the

button

once.

■

7. Press the CD

button.

The System plays the tracks in the order you have programmed
them.

■

You can skip to a particular program track by pressing the

button during Program Play.

To confirm the programmed tracks while the CD player is
stopped,

each press the

button; the tracks making up

the program will successively be displayed in the programmed order.

To delete all the tracks in the program,

press the

button re-

peatedly until all the tracks are cleared. Turning off the power will
also clear the programmed tracks.

To exit Program mode,

while the CD Player is stopped, press

the PROGRAM button to turn off the "PROGRAM" indicator. To
restore Program mode, in Stop mode, press the same button to light
on the "PROGRAM" indicator.

Notes:

•

If the total playback time of the programmed tracks exceeds 99
minutes 59 seconds, the total playback time will go out on the
display.

•

When the CD contains more than 21 tracks:
When you try to program a track number exceeding 20 (for
example the 25th track), the total playback time indication will
go out, though programming is possible.

To Modify the Program ———————

Modify the contents of the program while the CD Player is stopped.
Each time you press the

button, the last track in the program is de-

leted. To add new tracks to the end of the program, repeat above
steps 5 and 6.

The tracks will play in no special order when you use this mode.

■

1. Press the RANDOM button on the Remote

Control.

The "RANDOM" indicator lights up on the display.

■

2. Press the CD

button.