background image

3

RD-T7RGN/RD-T5RBU(B) / LVT0737-007A / English

Firmly insert the AC power cord supplied with the System into the AC inlet on the back of the Unit.

CAUTIONS:

ONLY USE THE JVC POWER CORD PROVIDED WITH THIS SYSTEM IN 
ORDER TO AVOID MALFUNCTION OR DAMAGE TO THE SYSTEM.

BE SURE TO UNPLUG THE POWER CORD FROM THE OUTLET WHEN 
GOING OUT OR WHEN THE SYSTEM IS NOT IN USE FOR AN EXTEND-
ED PERIOD OF TIME.

Plug the AC power cord into the wall outlet, and your System is at your 
command!

Common Operations

Turning the Unit On ————————

Press the 

 button.

The STANDBY indicator goes out, and the display comes on, and
“WELCOME” is displayed.
The Unit comes on ready to continue in the mode it was in when the
power was last turned off.

For example, if the last thing you were doing was listening to a 
CD, you are now ready to listen to a CD again. If you wish, you 
can change to another source.

If you were listening to the Tuner last, the Tuner comes on play-
ing the station it was last set to.

Note:

When power is supplied from the batteries, the 

 button 

on the Remote Control does not work.

Turning the Unit Standby  —————

Press the 

 button again.

When operating on AC power:

“GOOD BYE” is displayed and the display becomes blank, except
for the clock display. The STANDBY indicator lights up.

When in Standby mode, the Unit continues to a small amount of 
power to run the display.

To switch off the Unit completely, unplug the AC power cord 
from the AC outlet.

When power is supplied from the batteries:

When the Unit is turned off with the 

 button on the Unit (the

 button on the Remote Control is ineffective), the Standby in-

dicator lights up and the display is blank.

To switch off the Unit completely, remove the batteries from the 
Unit.

You can adjust the volume level between MIN (0) and MAX (32)
when the Unit is turned on.

Turn the VOLUME control on the Unit to the right or left to in-
crease or decrease the volume level.

OR

Press the or – button on the Remote Control to increase
or decrease the volume level.

CAUTION: DO NOT turn on the Unit and/or start 
playing any source without first setting the 
VOLUME control to MIN (0) , as a sudden blast of 
sound can damage your hearing.

Connecting the AC Power Cord

AC IN

REMOTE CONTROL RM-SRDT7

VOLUME

BASS/TREBLE

BAND

FM MODE

TUNER

CD

SLEEP

AHB PRO

REPEAT

4

5

6

1

2

3

10

+10

7

8

9

SNOOZE

P.TUNING

TUNER BAND

CD

RANDOM/

REPEAT

BASS/

TREBLE

MULTIJOG

VOLUME

AHB PRO

SNOOZE/DIMMER

CD/TUNER

ALARM

TIMER

SLEEP

CLOCK/

DISPLAY

STANDBY

STANDBY/ON

CD PORTABLE SYSTEM

BASS/TREBLE

AHB PRO

PHONES

, –

STANDBY indicator

CLOCK/DISPLAY

 AHB PRO

 [RD-T7RGN Only]

VOLUME control
(Jog dial)

 [RD-T7RGN Only]

BASS/TREBLE

Display

SNOOZE/DIMMER

[RD-T7RGN]

SNOOZE

[RD-T5RBU]

Turning the Power On and 
Standby

STANDBY

STANDBY/ON

or

STANDBY

STANDBY/ON

or

Adjusting the Volume

RD-T5RBU&T7RGN(B).book  Page 3  Tuesday, May 22, 2001  3:54 PM

Summary of Contents for RD-T5RBU

















Reviews: