During playback, turn
knob to play the previous or next file.
FOLDER SEARCHING
Press
/
to search folder backward or forward.
REPEAT FUNCTION
During playback, press
once, single track will be played repeatedly. Press
again, it will
repeatedly play all tracks in the whole CD disc.
TRACKS PROGRAMMING
Up to 99 mp3 tracks and 20 audio tracks can be programmed and played in any order. Ensure the unit is in stop mode.
1.
Repeatedly press
on the remote until “CD” is displayed.
2.
Press
.
“MEM” and “P01” will flash on the display.
3.
Select a desired track by turning
knob.
If folder selection is required, press
/
to search folder backward
or forward.
4.
Press
to confirm and store the track into memory.
5.
Repeat steps 3 and 4 to store additional tracks into the memory if necessary.
6.
When all the desired tracks have been programmed, press
to play the tracks in the assigned order.
7.
Press
to stop playing of programmed tracks and press
again to cancel programming.
COPYING OF CD
The system allows you to copy the track from CD to USB or SD.
COPY 1 TRACK
1.
Insert a USB device or SD card and then repeatedly press
until “CD” is displayed.
2.
Press during
playback.
“one” will flash on the display.
3.
Press to
confirm.
The USB or SD icon will flash on the display. Copying is performing now.
4.
After copying is finished, the unit will stop playback automatically.
The unit will return to CD mode;
CDDA format files recorded in “CDIN” folder;
MP3 format files recorded in “COPY” folder.
COPY 1 FOLDER (FOR MP3 DISC ONLY)
1.
Insert a USB device or SD card and select the CD function. Ensure the unit is in stop mode.
2.
Press
/
to search desired folder for copying.
3.
Press .
“one” will flash on the display.
4.
Turn
knob until “dir” is displayed.
5.
Press to
confirm.
The USB or SD icon will flash on the display. Copying is performing now.
6.
When the USB or SD icon stops flashing, it means that the folder copying is completed.
COPY ALL TRACKS
1.
Insert a USB device or SD card and select the CD function. Ensure the unit is in stop mode.
2.
Press .
“one” will flash on the display.
3.
Turn
knob until “ALL” is displayed.
4.
Press to
confirm.
The USB or SD icon will flash on the display. Copying is performing now.
5.
When the USB or SD icon stops flashing, it means that all track copying is completed.
Downloaded from www.vandenborre.be
EN-10