SETTING THE CLOCK
1
In standby state, press and hold
for about 3 seconds.
12h / 24h will flash on the display.
2
While the time format is flashing, turn the
knob to select 12h or 24h format.
3
Press to
confirm.
The hour digits will flash on the display.
4
While the hour digits are flashing, turn the
knob to select the correct hours.
5
Press to
confirm.
The minute digits will flash on the display.
6
While the minute digits are flashing, turn the
knob to select the correct minutes.
7
Press
to
confirm.
SETTING ALARM
1.
In standby state, press and hold
for about 3 seconds. The alarm sequence is “alarm on time > alarm
off time > alarm mode > alarm volume”.
2.
Setting alarm on time: “ON” will flash on the display.
a)
To set the hours, turn
knob to select the correct hours, then press
to
confirm.
b)
To set the minutes, turn
knob to select the correct minutes, then press
to confirm.
3.
Setting alarm off time: “OFF” will flash on the display.
a)
To set the hours, turn
knob to select the correct hours, then press
to
confirm.
b)
To set the minutes, turn
knob to select the correct minutes, then press
to confirm.
4.
Setting alarm mode: “TUNE” will flash on the display.
Turn
knob to select the alarm mode.
The sequence is TUNE > CD > USB > CARD, press
to confirm.
5.
Setting alarm volume: “V-[volume level]” will flash on the display.
Turn
knob to select the alarm volume, press
to confirm.
6.
When the alarm is set, the clock icon
will be display.
7.
To cancel alarm: in standby state, press
and the clock icon will disappear from the display.
SNOOZE FUNCTION
Press
on the remote control when the alarm sounds. The alarm will be turned off for about 10 minutes and then the
alarm will sound again. This function can be used for repeatedly within the 1-hour alarm active interval.
TIMER FUNCTION
1.
Push the
power knob
to power on the unit.
The red standby indicator light will go out.
2.
Repeatedly press
to choose the sleep time minutes from 90>80>70…..>10 off.
3.
The sleep time setting will be stored when the sleep icon
is displayed.
4.
When the set sleep time has elapsed, the unit will be switched to the standby state.
LISTENING TO RADIO
RADIO TUNING
1.
Press
to activate the radio mode.
2.
Press
to select the desired band (AM or FM).
3.
Tune in to the desired station by turning and holding
knob for about 2 seconds and then release
Downloaded from www.vandenborre.be
EN-5