JVC RC-EX20A, Instructions Manual

Page: 14 / 46

11
English
Programmed playback
Up to 20 tracks can be programmed to play in any desired order.
PUSH
PLA
Y/P
AUSE
ST
OP
MUTING
HBS/
PRESET
EQ
PROGRAM/
CLOCK SET
Add"/"
FM MODE
DISPLAY
TAPE
CD
BAND
RANDOM
TUNER
PRESET
CD REPEA
T
3,5 1 2,4,5 6
Note:
There is a time limit in doing the following steps. If the
setting is canceled before you finish, start from step 2
again.
1
Press CD/RANDOM to enter CD mode.
2
Press PROGRAM/CLOCK SET in stop mode.
The PROG indicator starts blinking in the display
window.
CD
PROG
3 Press
4
or
¢
to select a desired track to be
programmed.
CD
PROG
Track to be programmed
4
Press PROGRAM/CLOCK SET.
5
Repeat steps 3 and 4 to program other tracks.
6
Press PLAY/PAUSE
3
/
8
while the PROG
indicator blinks.
The tracks are played in the order you have
programmed.
Notes:
• If the PROG indicator goes off before you press PLAY/
PAUSE
3
/
8
, press PROGRAM/CLOCK SET, then
start playback.
• If you press CD/RANDOM while in CD mode, the unit
enters the random playback mode.
To stop during playback
Press STOP
7
.
The PROG indicator goes off and the unit exits from
programmed playback.
To check the program contents
Before starting programmed playback, press
PROGRAM/CLOCK SET.
Each time you press the button, the programmed tracks
are shown in the display window.
To add tracks in the program
1
Press PROGRAM/CLOCK SET repeatedly so that
“00” appears as the track number.
2 Press
4
or
¢
to select the track number, then
press PROGRAM/CLOCK SET.
To edit the program
1 Press PROGRAM/CLOCK SET repeatedly so that
the program number you want to edit is shown.
2 Press
4
or
¢
to select a new track number,
then press PROGRAM/CLOCK SET.
To repeat programmed playback
Press / CD REPEAT after starting
programmed playback.
To erase the entire program in the memory
Press PROGRAM/CLOCK SET so that the PROG
indicator blinks, and press STOP
7
while the PROG
indicator blinks.
The stored program is also cleared when the disc door is
opened.
Note:
After you have programmed 20 tracks, the program
number returns to “1.” Programming more tracks
overwrite the tracks already programmed to those
numbers.
02_01-20_RC-EX20SAB_J_En.p65 04.4.21, 2:46 PM 11