JVC RC-E451B, Instruction Manual

Page: 6 / 84

EN
FM OPERATION
TUNING IN RADIO STATIONS
1. Press the /FUNC. button to choose radio mode: FM mode.
2. Tune to the desired station by pressing
/TUN+
or
/TUN-
button, the station
frequency will show on the display.
3. Press the VOL.+/- button to adjust the volume to a comfortable level.
4. To optimize reception when listening to stations on the FM band, extend the telescopic
antenna to its full length. When the stereo signal is received, the “ ST “ show on the display.
RADIO AUTO SCAN (SEARCH)
Press the /SCAN/PAIR button on unit, the unit will conduct auto scan and program until
having found a strong signal. The unit will start to broadcast from the P01 after searching
finished, then press the 10/FOLD./MEM+ or 10/FOLD./MEM- to choose the desired stored
station.
RADIO STATION MEMORY OPERATION
You may pre-store 30 (FM) radio stations in memory for your preference.
1. Press the the /TUN+ or /TUN- button to select the first desired station. Then press
PROG./M/P-MODE button on unit, “ P01 ” will show on the display.
2. Press the 10/FOLD./MEM+ or 10/FOLD./MEM- to choose the desired sequence you want
to store, then press the PROG./M/P-MODE button on unit to confirm.
3. Search another station, repeat steps (1) & (2) until all desired stations stored. Up to 30
stations can be programmed.
CASSETTE OPERATION
UNDERSTANDING THE BUTTONS
PLAY - Press to play cassettes.
REW
- From stop mode, press to rewind the tape toward the beginning.
F.FWD - From stop mode, press to advance the tape toward the end.
STOP/EJ. - Press to stop current tape activity or to open the cassette compartment door when
no buttons are active.
PAUSE - Press to interrupt tape play or record mode. Press the second time to resume tape
play or tape record mode.
PLAYING A CASSETTE TAPE
1. Press the /FUNC. button to Choose TAPE mode.
2. Press STOP/EJ. key to open the cassette compartment door.
3. Insert cassette tape into the compartment with the open edge facing up and the full reel on
the right.
4. Close the door securely.
5. Press REW or F.FWD to move tape to the desired starting point.
6. Press PLAY key to begin playing the tape.
7. Adjust the volume to your desired listening level.
AUTOMATIC STOP FEATURE
When the cassette deck is operating in play or record mode and the end of the tape is reached,
the unit automatically shuts itself off and returns all buttons to the off position.