15
Snooze Function
When the alarm has been triggered, press the
DIMMER/SNOOZE button to temporarily switch off
the alarm. Press DIMMER/SNOOZE button to select a
time 5, 10, 15 or 30 minutes. (The options of SNOOZE
time is depend on the duration setting of the alarm).
The display will show “Zz” to indicate that snooze is on and the display will show the
minutes remaining before the alarm sounds again.
If one alarm goes off while the other is in snooze mode, snooze mode will be cancelled.
Sleep Function
This function allows you to program the unit to switch off by itself after a set period of time.
1. Press the SLEEP button to activate the Sleep Timer, “Set Sleep Time” shows on the
display. Press the SLEEP button repeatedly or turn the VOLUME SELECT dial to adjust
the setting. The time (in minutes) will change in the below sequence on every press:
Sleep off/10/20/30/60/70/80/90.
2. When your desired sleep time appears in the
display, release the button and the sleep function
will be activated in five seconds. “S#” will show
on the display (for example “S1” represents “10
minutes” sleep time).
3. When the sleep timer is zero, the unit will go off. To turn the sleep function off while the
sleep timer is still counting down, press the SLEEP button repeatedly until, “Sleep Off”
shows on the display.
4. To see how much sleep time is left press the SLEEP button.
JVC Wooden DAB Radio RA-D51 Manual.indd 15
11/09/2017 13:15
