DT-X71HI
Front view
⑴
PHONE:
Earphone jack, for SDI embedded audio, HDMI audio and analog audio
⑵
POWER:
Power on/off
Connect with power cable or mount battery, press the “
POWER
” and the power indicator is turned on and
after 10 seconds, the monitor will be switched on and get into normal working status. Press the “
POWER
”
again, the indicator is turned off and monitor is switched off.
Remark: Disconnect with power cable or take off the battery if the monitor will not be used for a period of
time.
⑶
CVBS:
Press to switch the input signal to Composite video
⑷
HDMI:
Press to switch the input signal to HDMI
⑸
SDI:
Press to switch the input signal to SDI
⑹
OVERSCAN:
Overscan / Underscan switch
⑺
MENU:
Press to enter Menu
⑻
F1:
User definable function key 1
⑼
F2:
User definable function key 2
⑽
RATIO:
16:9 and 4:3 switch
⑾
ZOOM:
Picture Zoom-in
Press “ZOOM” to switch ZOOM1: Canon DSLR scale zoom-in, and ZOOM2: pixel to pixel zoom-in.
⑿
DISPLAY:
Display current settings
Press “Display” to display safety mark, title and the current input signal information
⒀
OK:
Select and Apply
Under menu system, revolve “OK” to adjust settings and press to apply; and out of menu system,
directly revolve “OK” to adjust volume.
⒁
TALLY Light:
Red, Green and Yellow 3-color TALLY indicator
All manuals and user guides at all-guides.com
