JVC PK-EXT40T, Instructions Manual

Page: 3 / 12

3
PK-EXT40TG (Transmitter Unit)
A
[Opt] Indicator
Lights up when an optical fiber cable is connected
between the optical transmitter and optical receiver units,
and appears blinking if cable is not connected.
B
[Sink] Indicator
Lights up when a monitor display is connected. (Monitors
HPD)
C
[Source] Indicator
Lights up when a video signal generator is connected.
(Mo5 V supply)
D
[Dual] Indicator
Lights up when there is a dual-link signal input.
E
[OPT] Optical Output Terminal
For connecting a 12-fiber MPO connector cable.
F
[DVI-D] Input Terminals 1 to 4
These are video signal input terminals. Use them for
transmitting Type 1 to 4 dual-link DVI-D signals. (The
Status LED and channel number on the front panel are
linked.)
G
Power Input Terminal
For connecting the supplied power cable.
Connect the cable to an AC 100 V - 240 V power supply.
o
This equipment is in conformity with the
provisions and protection requirements of the
corresponding European Directives.
This equipment is designed for professional
appliances in large scale fixed installations and
can be used in the following environments.
●
Controlled EMC environment (for example purpose
built broadcasting or recording studio), and the rural
outdoors environment (far away from railways,
transmitters, overhead power lines, etc).
In order to keep the best performance and furthermore
for electromagnetic compatibility we recommend to use
the cables not exceeding the following length:
Cables Length
AC power cord Power supply cord 1.8 m
DVI cable Shielded cable 3.0 m
Optical cable Shielded cable 50 m
●
The inrush current of this apparatus is 9.5 amperes.
Part Names and Functions
Front Panel
Optical DVI Extender PK-EXT40T
Opt
1 2 3 4
Sink
Source
Dual
AB C D
Rear Panel
OPT
DVI-D
(Dual link)
100
l
240
VAC
1
3
2
4
E F G
EMC Supplement (Europe only)
WARNING
This is a Class A product. In a domestic environment
this product may cause radio interference in which case
the user may be required to take adequate measures.
In case where the strong electromagnetic waves or
magnetism are near the signal cable, the picture will
contain noise. In such cases, please keep the cable
away from the sources of the disturbance.
PK-EXT40TG_EN.book Page 3 Tuesday, April 23, 2013 1:53 PM