JVC PD-42WV74 Service Manual Download Page 186

Page: 186 / 197

The M

ENU

button allows you to access JVC’s onscreen menu system. Press M

ENU

to activate

the onscreen menu system.

• See individual topics like “Sound Adjust” for specific information on using menus.

Menu

C.C. (Closed Caption)

Button Functions

Back

Use the C.C. (Closed Caption) button to select the mode of closed caption.

Press the C.C. button

• See page 46 when you set the caption/text mode.

This button allows you to go back in the menu to change a selection or correct a mistake.

This button confirms your selection when you are in one of the onscreen menus.

When you change the aspect ratios, it is different from their broadcast or recorded program.

Aspect Ratios (Continued)

Press the A

SPECT

button

•

By pressing the A

SPECT

button, you can change the size.

NTSC, 480i, 480p,

HDCP 480p

HD, HDCP 1080i

720P, HDCP 720p

Notes:

• You can also choose the size by pressing the

buttons.

• When you change the aspect ratio or signal, reset the picture position to center.

LCT1480-001A_rev7 61

7/29/03, 11:05:42 AM

Summary of Contents for PD-42WV74






































































































































































































Search results

Summary of Contents for PD-42WV74

Reviews:

Related manuals for PD-42WV74

Brands by name

Popular brands

JVC PD-42WV74, Service Manual

Search results

Summary of Contents for PD-42WV74

Reviews:

Related manuals for PD-42WV74

Brands by name

Popular brands