33
Initial Setup
Auto Tuner Setup
The auto tuner setup function is described on page 25 as the interactive plug-in menu. If you
need to run the auto tuner setup again, follow the steps below.
Press
the
M
ENU
button
To AUTO TUNER SETUP
¥
To operate
¥
To choose CABLE or AIR
Press the O
K
button to start
Programming will take approximately 1 to 2 minutes. The auto tuner is finished when the
message
PROGRAMMING OVER!
appears onscreen.
Press the Menu button when finished
Channel Summary
Channel summary allows you to customize the line-up of channels received by your TV.
You can add or delete channels from the line-up or prevent any unauthorized viewers from
watching any or all 181 channels.
Press the M
ENU
button
To CHANNEL SUMMARY
¥
To
operate
The Channel summary screen will now be displayed with
the channels set to scan marked with an “
✓
”. You can
delete channels from the scan by removing the “
✓
”. If any
channels were missed during auto tuner setup and you wish
to add them, you may by placing an “
✓
” next to the channel
number.
¥
To the SCAN column
Press the O
K
button to include or delete from scan
Press the M
ENU
button when finished
You can block access to a channel by activating the channel lock.
Press the M
ENU
button
To
CHANNEL
SUMMARY
¥
To operate
¥
To the Lock Column (
)
Press the Z
ERO
button to lock or unlock that channel
Press the M
ENU
button when finished
