9
Stand (supplied)
When Placing the Main Unit
Vertically
Make sure to attach the supplied stand to the main unit.
Attach the supplied stand firmly to the back of the main
unit after connections have been completed.
CAUTION:
Detach the stand before carrying the main unit.
Side panel of the main unit
From a USB mass storage class
device
When connecting a USB mass storage class device
• When connecting with a USB cable, use the USB 2.0 cable
whose length is less than 1 m.
• You can connect a USB mass storage class device such as
a USB flash memory device, hard disk drive, multimedia
card reader, etc. to this System.
• You cannot connect a computer or JVC Everio
camcorder to the USB MEMORY PLAY terminal (
)
of the System.
• Electrostatic shock at connecting a USB device may cause
abnormal playback of the device. In this case, disconnect
the USB device then reset this System and the USB
device.
EN_NX-T5[B].indb 9
EN_NX-T5[B].indb 9
10.3.19 5:26:02 PM
10.3.19 5:26:02 PM
