JVC MX-K5, Service Manual

Page: 11 / 73

MX-K5/MX-K6
Disconnect the card wire from the connector UCW3,
UCW4,UCW5 and UCW6 on the FL & system control
board.
Remove the five screws U attaching the FL & system
board.
Disconnect the card wire from the connector UCW2
on the FL & system control board.
1.
2.
3.
Removing the FL display & system
control board
(See Fig.22 and 23)
Disconnect the card wire from connector UCW1 on
the power / CD switch board.
Remove the five screws T attaching the power / CD
switch board and release the tab e.
1.
2.
Prior to performing the following procedure, remove
the metal cover, the CD changer unit and the front
panel assembly.
Removing the power / CD switch board
(See Fig.22)
Prior to performing the following procedure, remove
the FLdisplay & system control board.
Pull out the VOLUME knob, ACTIVE BASS EX.
LEVEL knob and SOUND MODE nob from front
side.
Remove the ten screws V attaching the front board
and release the two tabs f out ward.
1.
2.
Removing the front board (See Fig.24)
<Front panel assembly>
Prior to performing the following procedure remove
the FLdisplay & system control board.
You can pull out the headphone board.
1.
Removing the headphone board
(See Fig.24)
Disconnect the card wire x from the mechanism
board on the cassette mechanism assembly.
Remove the six screws W attaching the cassette
mechanism assembly.
1.
2.
Removing the cassette mechanism
assembly (See Fig.24)
Fig.22
Fig.23
Fig.24
Headphone
board
Tab e
Cassette mechanism assembly
T
Power / CD switch board
V
V
U
U
FLdiplay & system
control board
W
Front board
Card wire x
Sound mode knob
Volume knob
Subwoofer knob
f
V
UCW2
UCW3
UCW4
UCW5
UCW6
UCW1