– 21 –
Selecting Playback Modes
This unit cannot accept any disc operations while reading
disc contents.
Programming the Playing Order of the Titles
and Tracks—Program Play
You can arrange the order in which the titles (for DVD) and
tracks (for VCD and CD) play before you start playing. You
can program up to 18 steps.
• When you use Program play for a VCD with the PBC
function activated, the PBC function is turned off.
• Program play cannot be used on some DVD discs.
On the unit:
• There is a time limit in doing the following steps. If the
setting is canceled before you finish, start from step 2
again.
1
Load discs.
• If the current playing source is not the DVD/VCD/CD
player press DVD
3¥8
, then
7
before going to the next
step.
2
Press PROGRAM so that
“PROGRAM” appears on the
display.
The PRGM (program) indicator also lights up
on the display.
• If a program has been stored in memory, the program is
called up.
3
Press one of the disc
number buttons (DVD1,
DVD2 or DVD3) you want
to program.
4
Turn
4
/
¢
to select a title
or track number, then press SET.
5
To program another title or track from the
same disc, repeat step 4.
To program another title or track from a
different disc, repeat steps 3 and 4.
Each time you select a title or track, the program item is
added up to 18 steps.
6
Press DVD
3¥8
.
The titles and tracks are played in the
order you have programed.
To stop playing, press
7
.
To go to the next track, turn
4
/
¢
to the right.
Even if you turn
4
/
¢
to the left
It just goes back to the beginning of the current title or track, but
cannot go back to the previous titles or tracks.
To modify the program
You can modify the program before or after playing.
To erase the last steps, press CANCEL/DEMO.
• Each time you press the button, the last
programed step is erased from the program.
To add steps in the program before playing,
simply select the disc number and title/track
numbers you want to add by following steps 3 to 5 of the
programming procedure.
To erase program completely, press
7
when the playback is
stopped.
The program you have made will be also erased,
• when you eject all the discs.
• when you unplug the AC power cord.
• when a power failure occurs.
To exit from Program play mode, press PROGRAM after
playing. The PRGM (program) indicator goes off. The
program you have made is memorized.
To check the programed contents
Press PLAY MODE on the remote control. The programed
contents appear on the TV screen.
To erase the play mode screen, press PLAY MODE again.
Selected title or track number
Selected disc number
Program step number
Ex.: When VCD or CD is a source disc.
Ex.: When VCD or CD is a source disc.
EN21-24.MX-DVA9[J]_1
01.7.3, 10:28 AM
21
