1-6 (No.MB508)
SECTION 3
DISASSEMBLY
3.1
Main body section
3.1.1 Removing the top cabinet
(See Figs.1 and 2)
(1) From the both sides of the main body, remove the six
screws
A
attaching the top cabinet. (See Fig.1.)
(2) From the back side of the main body, remove the three
screws
B
attaching the top cabinet. (See Fig.2.)
(3) Take out the top cabinet from the main body while lifting the
rear section of the top cabinet in the direction of the arrow.
(See Fig.1.)
3.1.2 Removing the CD deck assembly
(See Figs.2 to 4)
• Remove the top cabinet.
(1) From the back side of the main body, remove the two
screws
B
attaching the CD deck assembly to the rear cab-
inet. (See Fig.2.)
(2) From the bottom side of the CD deck assembly, turn the
gear cam in the direction of the arrow and draw the tray
disc out of the CD deck assembly in the direction of the ar-
row 1. (See Figs.3 and 4.)
(3) Remove the CD door from the tray disc in the direction of
the arrow 2. (See Fig.4.)
(4) From the left side of the main body, disconnect the wire
from the connector
CN103
on the main AMP board. (See
Fig.4)
(5) Disconnect the card wire from the connector
CW105
on the
CD board. (See Fig.4)
(6) From the both sides of the main body, remove the two
screws
D
and then take out the CD deck assembly from the
main body. (See Fig.4.)
Fig.1
Fig.2
Fig.3
Fig.4
Top cabinet
A
Rear cabinet
C
B
CD deck
Gear cam
OPEN
Main AMP board
D
CD deck
2
CD board
CD door
Tray disk
1
CN103
CW105