1-8 (No.MB508)
3.1.6 Removing the front cabinet assembly
(See Figs.9 to 11)
• Remove the top cabinet and CD deck assembly.
(1) From the top side of the main body, remove the screw
N
at-
taching the earth wire on the bottom cabinet. (See Fig.9.)
(2) Disconnect the card wire from the connector
CN101
on the
main AMP board. (See Fig.10.)
(3) Disconnect the wire from the connector
CN102
on the main
AMP board. (See Fig.10.)
(4) From the both sides of the main body, remove the two
screws
P
attaching the front cabinet assembly. (See
Fig.11.)
(5) From the both and bottom sides of the main body, release
the joints (
c
,
d
) and then take out the front cabinet assem-
bly from the main body in the direction of the arrow. (See
Figs.11.)
Fig.9
Fig.10
Fig.11
N
Front cabinet assembly
Bottom cabinet
Main AMP board
CN101
CN102
Bottom cabinet
P
c
d
d
Front cabinet assembly
