Filename [SR-MV40U_11Subsidiary.fm]
Masterpage:Left+
70
EN
Page 70
March 13, 2006 11:41 am
SUBSIDIARY SETTINGS
VIDEO IN/OUT
8
MONITOR TYPE
—
4:3LB
/
4:3PS
/
16:9 AUTO
/
16:9 FIX
You can select the monitor type depending on the TV used when
you play back DVD VIDEO discs recorded for wide-screen TVs. For
details, refer to “Monitor Set (DVD Deck Only)” (
8
FRONT AUX F-1
—
VIDEO
/
S-VIDEO
Select the appropriate mode depending on the connector (F-1)
being used on the front panel.
VIDEO
: To use the [VIDEO] input connector on the front panel.
S-VIDEO
: To use the [S-VIDEO] input connector on the front panel.
NOTE:
This setting is also applied to the VCR deck.
8
REAR AUX L-1
—
VIDEO
/
S-VIDEO
Select the appropriate mode depending on the connector (L-1)
being used on the rear panel.
VIDEO
: To use the [VIDEO INPUT] connector on the rear panel.
S-VIDEO
: To use the [S VIDEO INPUT] connector on the rear
panel.
NOTE:
This setting is also applied to the VCR deck.
RECORDING SET
8
SAVE AS LIBRARY
—
OFF
/
ON
When this function is set to “ON”, the recording information is
automatically stored in the library. For details, refer to “Edit Library
Information” (
8
XP MODE REC AUDIO
—
DOLBY DIGITAL
/
LINEAR PCM
You can select the audio format when you record a program in XP
mode. When this function is set to “LINEAR PCM”, you can obtain
a high-quality audio sound.
DOLBY DIGITAL
: To record in Dolby Digital format.
LINEAR PCM
: To record in Linear PCM format.
8
2ND AUDIO RECORD
—
OFF
/
ON
When this function is set to “ON”;
If a SAP program is received, the SAP audio is recorded on L/R
tracks. The main audio is not recorded.
If a non-SAP program is received, the main audio is recorded on L/
R tracks.
When this function is set to “OFF”, the SAP audio cannot be
recorded.
NOTE:
When the channel is changed on the unit;
●
The “MONO” indicator appears on the screen for about 5 seconds if
the program is a monaural broadcast.
●
The “STEREO” indicator appears on the screen for about 5 seconds
if the program is a stereo broadcast.
●
Both “STEREO” and “SAP” indicators appear when a stereo program
is accompanied by SAP sound.
●
Both “MONO” and “SAP” indicators appear when the main audio on
the monaural broadcast is accompanied by SAP sound.
DISPLAY SET
8
SUPERIMPOSE
—
OFF
/
AUTO
When this function is set to “AUTO”, various operational indicators
appear on the TV screen.
OFF
: To turn off superimposed indications.
AUTO
: To superimpose operational indications for approximately
five seconds just after the corresponding operation.
NOTES:
●
Even when “SUPERIMPOSE” is set to “OFF”, you can display the
various operational indicators by pressing
ON SCREEN
. To clear the
operational indicators, press
ON SCREEN
again.
●
When you use this unit as the source player for editing, be sure to set
“SUPERIMPOSE” to “OFF” before starting. (
●
When you select “AUTO”, during playback, the operation mode
indicators may be disturbed depending on the type of disc being
used.
8
GRAY BACK
—
OFF
/
ON
When this function is set to “ON”, the TV screen becomes all grey
when receiving a channel not in use.
NOTE:
When you want to receive an unstable channel with poor signals, set
this function to “OFF”.
8
DIMMER
—
BRIGHT
/
DIM
You can change the brightness of the front display panel.
BRIGHT
: Normally select this.
DIM
: To dim the front display panel. (Blue lamp on the front display
panel is turned off.)
8
POWER SAVE
—
OFF
/
ON
When this function is set to “ON”, you can reduce the power
consumption while the unit is turned off.
NOTES:
●
During Power Save mode —
— the front display panel will be turned off.
●
Power Save does not work when the unit is in the Timer mode.
●
It takes some time for the unit to complete initialization after you turn
on unit power, with “WAKE UP” blinking on the front display panel.
8
ON SCREEN LANGUAGE
This unit offers you the choice to view on screen messages in 3
different languages.
For details, refer to “On-screen Language Set” (
OTHERS
8
RESUME
—
OFF
/
ON
/
DISC RESUME
When this function is set to “ON” or “DISC RESUME”, you can use
the resume function. (
OFF
: You cannot use the resume function.
ON
: You can start playback from the resume point of the placed
disc.
DISC RESUME
: The unit retains a memory of the resume points of
the last 30 discs played back, even though they have been
ejected.
NOTE:
“DISC RESUME” setting works on DVD VIDEO, VCD and already
finalized DVD-R/DVD-RW (video mode) discs. For other types of discs,
the function under “ON” setting will be applied even if “RESUME” is set
to “DISC RESUME”.
SR-MV40US.book Page 70 Monday, March 13, 2006 11:41 AM
