1-8 (No.XE003)
3.1.9 Removing the parts on the main board(See Figure 15
and Figure 16)
• Prior to the following procedure, main board should be re-
moved.
*Removing the hard disc drive.
(1) Pull out the flexible wire from the connector
CON25
on
the main board.
Fig.15
(2) Remove two screws
O
that are attached to the hard disc
drive.
*Removing the built in memory card and wireless LAN card.
(1) Release the catches on both sides of the memory card
i
.
Pull out the memory card as it pops up.
(2) Release the catches on both sides of the wireless LAN
card
j
and remove the wireless LAN card as the same way
as removing the memory card .
Fig.16
Main board
Hard disc drive
CON25
Main board
Memory card
Wireless LAN card
i
i
j
j
O
O
