background image

4

SETTING UP

Connecting the unit

This compact disc changer/player needs to be connected to an
amplifier/receiver for audio reproduction.

CAUTION

Do not connect the AC power cord until all other neces-
sary connections have been made.

Analog audio connections

First connect the OUTPUT jacks in the back of this unit with the
CD or AUX input jacks of the amplifier/receiver using the accessory
audio cord. Be sure to insert the audio cord plugs firmly into the
proper jacks matching the output and input channels — RIGHT to
RIGHT and LEFT to LEFT.

OUTPUT

RIGHT

LEFT

(Red)

(White)

To input audio jack of
the amplifier/receiver

Audio cord

Digital audio connections

If the MD, CD-R, amplifier or receiver you are making connections
to has a digital optical input jack, connect the DIGITAL OUT
OPTICAL jack in the back of this unit to the CD or AUX digital
input jack on the MD, CD-R, amplifier or receiver using a
commercially available optical fiber cable.

DIGITAL OUT

OPTICAL

Optical fiber cable

(not supplied)

To digital input jack
of the MD/CD-R/amplifier/
receiver

Be sure to pull off the caps before you make any connections, as
shown above. Place the caps in a safe place.

System control connections

If you are connecting the unit to a JVC audio component using the
CompuLink-3 remote control system, connect the units with the
accessory CompuLink cord. Either one of the COMPULINK-3
(SYNCHRO) jacks in the back of this unit can be used.

COMPULINK-3

(SYNCHRO)

To CompuLink jack

CompuLink cord

When you use this system, you can remote-control this CD unit
from the connected JVC amplifier/receiver. (See Page 12 for more
information.)

NOTE:

JVC components equipped with two COMPULINK-3
(SYNCHRO) ports can be connected in series; a com-
ponent with only one jack may only be connected at
the end of the series.

Power connection

Connect the accessory AC power cord into the socket in the back
of this unit. Then insert the plugs into an AC outlet. (Do not connect
the power cord to a switched AC outlet of a component if the
CompuLink system is used.)

Wall outlet

AC power cord

3

Summary of Contents for MC2000 - XL CD Changer





















Reviews: