manualshive.com logo in svg

JVC LYT1094-001A, Instructions Manual

Share
Download
JVC LYT1094-001A Instructions Manual Download Page 91

Master Page: Right

_001EN_SHEET_M3D7S-Sheet_p1-7.fm

Page 7

— 7 —

4

When the message asking whether it is OK to restart the PC appears, click [Yes].

The PC restarts, and after a moment the [Setup] screen from step

1

 appears.

5

Repeat steps

3

 and 

4

 to install all of the desired software.

Installing [ImageMixer with VCD 1.1]

When the error message below appears while installing ImageMixer, click [OK] to complete installation.

[Setup Status] screen appears. Wait for a 
moment until the installation is finished.

When the installation is finished, [Digital Photo 
Navigator Setup] screen appears and asks you if 
you want to create the icon on the desktop.

If you need it, click [Yes]. If not, click [No].

NOTES:

●

The Digital Photo Navigator and ImageMixer with VCD instruction manual is included on the CD-ROM 
in PDF format. Double-click the [JVC] folder and then double-click the [Docs] folder. Open the 
“Start.pdf” file and click the button of the desired language. Note that Adobe

®

 Acrobat

®

 Reader must be 

installed to read PDF files.

●

For details on how to use 

Windows

®

 NetMeeting

®

 or 

Windows

®

 Messenger

 (Windows

®

 XP only), refer to 

“Appendix” in the Digital Photo Navigator instruction manual on the CD-ROM.

●

When installing the [ImageMixer with VCD 1.1], select the desired language in the [Choose Setup 
Language] screen.

●

If you perform installation of a software that is already installed, uninstallation will start. In this case, 
perform the installation again after uninstallation is finished.

●

DirectX is necessary so that USB Video Streaming driver works properly. To install DirectX, select 
“DirectX” on the installation screen of ImageMixer with VCD 1.1.

●

When you install USB Video Streaming driver with Windows

®

 2000 and Windows

® 

XP, a warning 

message dialog box on digital signature may appear. In this case, click [OK] to continue installation 
because this problem has no effect on the use of the driver.

●

When you install ImageMixer with VCD 1.1 with Windows

®

 2000 and Windows

® 

XP, the [Microstaff 

WINASPI] screen appears. Click [Next] to continue installation.

CONTINUED ON NEXT PAGE

_001EN_SHEET_M3D7S-Sheet_p1-7.fm  Page 7  Friday, December 13, 2002  12:12 PM

Summary of Contents for LYT1094-001A























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands