background image

26

 EN

Fade/Wipe Effects

These effects let you make pro-style scene
transitions. Use them to spice up the transition
from one scene to the next. You can also vary
transitions from scene to scene.

IMPORTANT:

Some Fade/Wipe Effects cannot be used with
certain modes of Programme AE with special
effects (

 pg. 28). If an unusable Fade/Wipe

Effect is selected, its indicator blinks or goes
out.

Recording
Start/Stop Button

MENU/BRIGHT Wheel

Power Switch

FADE/WIPE SELECTION (

,

 and 

)

Fade or Wipe works when video recording is started or
when you stop recording.

1

Set the 

VIDEO/DSC

 Switch to “VIDEO”, then set the

Power Switch to “

” while pressing down the Lock

Button located on the switch.

2

Press 

MENU/BRIGHT

. The Menu Screen appears.

3

Rotate 

MENU/BRIGHT

 to select “

”, then press it.

4

Rotate 

MENU/BRIGHT

 to select the desired function,

then press it. Selection is complete.
•The FADER/WIPE Menu disappears and the effect is

reserved. The indicator representing the selected
effect appears.

5

Press the Recording Start/Stop Button to activate the
Fade-in/out or Wipe-in/out.

PICTURE WIPE OR DISSOLVE SELECTION
(

 and 

)

The Picture Wipe or Dissolve works when video recording
is started.

1

Follow steps 

1

 through 

4

 above.

2

If you select Picture Wipe/Dissolve during
recording . . .

.... press the Recording Start/Stop Button when one

scene is finished. The point at which the scene
ended is stored in memory.

If you select Picture Wipe/Dissolve during Record-
Standby mode . . .

.... press the Recording Start/Stop Button to start

recording and press it again when one scene is
finished. The point at which the scene ended is
stored in memory.

If you select Picture Wipe/Dissolve during Record-
Standby mode after performing a Picture Wipe/
Dissolve . . .

.... the point at which the scene ended is already

stored in memory.

3

If you start recording a new scene within 5 minutes of
the end of the previous recording (without having
turned the camcorder’s power off), the previous scene
wipes out, revealing the new scene.

To Deactivate The Selected Effect . . .

.... select “OFF” in step 

4

.

NOTES:

You can extend the length of a Fade or Wipe
by pressing and holding the Recording Start/
Stop Button.

If the power is turned off after a scene is
finished recording, the stored point is erased,
disabling the Picture Wipe/Dissolve combina-
tion. When this happens, the Picture Wipe/
Dissolve indicator blinks. Also note that
power shuts off automatically if 5 minutes
elapse in the Record-Standby mode.

The sound at the end of the last recorded
scene is not stored.

RECORDING

  Advanced Features For Video And D.S.C. (cont.)

VIDEO/DSC Switch (Open the
LCD monitor to access this switch.)

Summary of Contents for LYT0596-001A

















































































Reviews: