16
EN
PL
AY
O
FF
FUL L
MULTI-9
Multi-Analyser9
FRAME
Snapshot mode with
frame*
FULL
Snapshot mode with no
frame*
MULTI-4
Multi-Analyser 4
*
There is the sound effect of a shutter closing.
RECORDING
Basic Recording For Video (cont.)
Snapshot (For Video Recording)
This feature lets you record still images that look like
photographs onto a tape.
SNAPSHOT MODE SELECTION
1
Set the
VIDEO/DSC
Switch to “VIDEO”, then set the
Power Switch to “
” or “
” while pressing down
the Lock Button located on the switch.
2
Choose the appropriate Snapshot mode from the 5
available by repeatedly pressing
MODE
until the
desired snapshot mode indicator appears.
SNAPSHOT RECORDING
1
Press
SNAPSHOT
.
If you press during Record-Standby . . .
.... “PHOTO” appears and a still image will be
recorded for approx. 6 seconds, then the
camcorder re-enters the Record-Standby mode.
If you press during Recording . . .
.... “PHOTO” appears and a still image will be
recorded for approx. 6 seconds, then the normal
recording resumes.
Motor Drive Mode
Keeping
SNAPSHOT
pressed provides an effect similar to
serial photography. (Interval between still images: approx.
1 second)
NOTES:
●
Even if “MULTI-4” or “MULTI-9” is engaged, Snapshot
recording will be performed in the FULL mode during
Digital Zoom.
●
If Snapshot recording is not possible, “PHOTO” blinks
when
SNAPSHOT
is pressed.
●
If Programme AE with special effects (
pg. 28) is
engaged, certain modes of Programme AE with special
effects are disabled during Snapshot recording. In such a
case, the icon blinks.
●
If
SNAPSHOT
is pressed when “DIS” is set to “ON”
(
pg. 24), the Stabiliser will be disabled.
●
When “REC SELECT” is set to “
/
” in the
Menu Screen (
pg. 25), still images are recorded not
only onto the tape but also in the camcorder’s built-in
memory. If
SNAPSHOT
is pressed when a tape is not
loaded, still images will not be recorded in the memory.
●
To dub images recorded on a tape to the camcorder’s
built-in memory,
pg. 47.
●
During tape playback as well, all snapshot modes are
available when “
COPY” is set to “OFF” in the
Menu Screen (
pg. 32). However, the shutter sound is
not heard.
●
During Snapshot recording, the image displayed in the
viewfinder may be partially missing. However, there is
no effect in the recorded image.
●
When a cable is connected to the AV connector, the
shutter sound is not heard from the speaker, however it
is recorded onto the tape.
●
will appear while the snapshot is being taken.
Power Switch
SNAPSHOT Button
Lock Button
MODE Button
VIDEO/DSC Switch (Open the
LCD monitor to access this switch.)
PIN-UP
Pin-Up mode*
Snapshot mode
