JVC LYT0242-001A Instructions Manual Download

Page: 28 / 72

FOCUS
EXPOSURE

AUTO

OFF

AUTO

W. BALANCE

FADER

/ WIPE

P. AE

/ EFFECT

RETURN

PAUSE

P. AE / EFFECT

SLOW 4X

SLOW 10X

B/W

STROBE

TWILIGHT

SEPIA

MONOTONE

CLASSIC FILM

SEL.

Programme AE With Special Effects

IMPORTANT:

If certain Fades or Wipes (

pg. 27) are activated, some

modes of Programme AE with special effects cannot be
used. If you select a mode that is unusable in the current
situation, the mode's symbol blinks.

You can choose any one of the effects from the P.AE/
EFFECT Menu.

SELECT OPERATION MODE

Set the Power Switch to “PRO.”.

ACCESS MANUAL MODE ITEM MENU

Press the Select Dial and move the highlight bar to
“P.AE/EFFECT” by rotating the Select Dial.

ACCESS P.AE/EFFECT SELECT MENU

Press the Select Dial. The P.AE/EFFECT Menu
appears.

SELECT MODE

Move the highlight bar to the desired mode by
rotating the Select Dial, then press it.

•The P.AE/EFFECT Menu disappears and the selected

mode is activated. The symbol of the selected mode
appears.

DISABLE MODE

To turn off the selected mode, re-access the P.AE/
EFFECT Menu and move the highlight bar to “OFF”
by rotating the Select Dial. Then press it.

NOTE:

Programme AE with special effects can be changed during
recording or during Record-Standby.

Display

RECORDING

Advanced Features (cont.)

Manual Mode Item
Menu

P.AE/EFFECT Menu

The indicator for the selected mode appears, and the
selected mode is engaged.

Select Dial

Power Switch

Summary of Contents for LYT0242-001A








































































Search results

Summary of Contents for LYT0242-001A

Reviews:

Related manuals for LYT0242-001A

Brands by name

Popular brands

JVC LYT0242-001A, Instructions Manual

Search results

Summary of Contents for LYT0242-001A

Reviews:

Related manuals for LYT0242-001A

Brands by name

Popular brands