JVC LYT0002-0X8A Page 70 Instructions Manual Download

Page: 70 / 84

TROUBLESHOOTING

(Cont.)

SYMPTOM

POSSIBLE CAUSES

CORRECTIVE ACTION

25.

•This is a result of

exceedingly high contrast,

and is not a malfunction.

26.

•If Audio Dubbing or Insert

Editing have been performed

repeatedly on the same

portion of the tape,

disturbance to the sound

and picture may result.

27.

•“DISPLAY” is set to “OFF” in

the Date/Time Menu.

•Interface shooting is

performed.

28.

•“ON SCREEN” is set to

“OFF” in the Date/Time

Menu.

29.

•You have made the

indicators disappear.

30.

•In places subject to low

temperature, images

become dark due to the

characteristics of the LCD

monitor. When this

happens, the displayed

colours differ from those that

are actually recorded. This is

not a defect of the

camcorder.

• When the LCD monitor's

fluorescent light reaches the

end of its service life, images

on the LCD monitor become

dark. Consult your nearest

JVC dealer.

31.

•The light used to illuminate

the LCD monitor causes it to

become hot.

32.

•This may occur when the

surface or the edge of the

LCD monitor is pressed.

33.

The speaker volume is too

great.

34.

————

25.

————

26.

• Use a new, or infrequently

used, tape for Audio

Dubbing and Insert Editing

(

pg. 65, 66).

27.

• Set “DISPLAY” to “ON” in

the Date/Time Menu

(

pg. 11).

• During interface shooting,

the date/time does not

appear (

pg. 23).

• Press the IND. ON/OFF

button for longer than 1

second to make the indica-

tors appear (

pg. 22).

28.

• Set “ON SCREEN” to “ON”

in the Date/Time Menu

(

pg. 33).

• Press the IND. ON/OFF

button for longer than 1

second to make the indica-

tors appear (

pg. 22).

29.

• Press the IND. ON/OFF

button for longer than 1

second to make the indica-

tors appear (

pg. 22).

30.

• Adjust the brightness and

angle of the LCD monitor

(

pg. 22, 23).

31.

• Close the LCD monitor to

turn it off or set the Power

Dial to “OFF”, and let the

unit cool down (

pg. 19).

32.

————

33.

• Turn the speaker volume

down (

pg. 49).

34.

• Wipe them gently with soft

cloth. Wiping strongly can

cause damage.

25.

When shooting a subject

illuminated by bright

light, vertical lines appear.

26.

There are disturbances in

audio and video.

27.

During recording, the

date/time does not

appear.

28.

The indicators and

messages do not appear

on screen.

29.

The indicators do not

appear on the LCD

monitor or in the

viewfinder.

30.

Images on the LCD

monitor appear dark or

whitish.

31.

The rear of the LCD

monitor is hot.

32.

The indicators and the

image colour on the LCD

monitor are not clear.

33.

Images on the LCD

monitor are jittery.

34.

The LCD monitor and the

lens have become dirty

(ex. fingerprints).

Summary of Contents for LYT0002-0X8A




















































































Search results

Summary of Contents for LYT0002-0X8A

Reviews:

Related manuals for LYT0002-0X8A

Brands by name

Popular brands

JVC LYT0002-0X8A, Instructions Manual

Search results

Summary of Contents for LYT0002-0X8A

Reviews:

Related manuals for LYT0002-0X8A

Brands by name

Popular brands