manualshive.com logo in svg

JVC LX-WX50, User Manual, Page: 2 / 51

Share
Download
JVC LX-WX50 User Manual Download Page 2

2 

Table of contents  

Table of contents

Safety precautions................. 3
Important safety instructions

.............................................. 4

Overview ............................... 7

Shipping contents........................ 7
Projector exterior view................. 8
Controls and functions................. 9

Control panel ......................................9
Remote control .................................10

Installation ........................... 12

Choosing a location...................12
Obtaining a preferred projected 

image size .................................13

Projection dimensions ......................13
Shifting the projection lens vertically

..........................................................14

Connection .......................... 15
Operation............................. 16

Starting up the projector ............16
Shutting down the projector....... 16
Selecting an input source .......... 17
Adjusting the projected image ... 18

Adjusting the projection angle ..........18
Auto-adjusting the image..................18
Fine-tuning the image size and clarity

..........................................................18

Correcting keystone..........................19
Correcting image corners .................19

Menu Functions................... 20

About the OSD Menus .............. 20
Using the OSD menu ................ 20

DISPLAY

 menu ................................21

PICTURE

 menu................................23

SOURCE

 menu ................................25

SYSTEM SETUP: Basic

 menu ........25

SYSTEM SETUP: Advanced

 menu 26

INFORMATION

 menu ......................28

OSD menu structure ........................ 29

Controlling the projector 
remotely............................... 31

Configuring the 

LAN Settings

......... 31

Controlling the projector using a web 
browser (e-Control™) ...................... 32
Controlling the projector 
using PJLink™................................. 34

Maintenance........................ 36

Care of the projector ................. 36
Lamp information ...................... 37

Getting to know the lamp hour......... 37
Extending lamp life .......................... 37
Timing of replacing the lamp............ 38
Replacing the lamp .......................... 39

Indicators .................................. 42
Troubleshooting ........................ 43
Specifications............................ 44

Projector specifications.................... 44
Dimensions ...................................... 45
Timing chart ..................................... 46

Warranty and Copyright 
information........................... 51

Warranty ................................... 51
Copyright .................................. 51
Disclaimer ................................. 51

Summary of Contents for LX-WX50




















































Reviews:

No comments