Connections
11
CAUTION
• When you connect speakers other than the supplied ones, use
speakers of the same speaker impedance (SPEAKER IMPEDANCE)
indicated near the speaker terminals on the rear of the powered
subwoofer.
• DO NOT connect more than one speaker to one speaker terminal.
• When installing the satellite speakers on the wall;
•
Be sure to have them installed on the wall by a qualified personnel.
DO NOT install the satellite speakers on the wall by yourself to
avoid unexpected damage from their falling off the wall due to
incorrect installation or weakness in wall structure.
•
Care must be taken in selecting a location for speaker installation
on a wall. Injury to personnel or damage to equipment may result
if the speakers installed interfere with daily activities.
Center speaker
SP-THS5C
• Connect the silver cords to the black (
r
) terminals.
• Connect the copper cords to the (
q
) terminals
referring to the table below:
Speaker cord (supplied)
FRONT SPEAKERS (LEFT)
White
FRONT SPEAKERS (RIGHT)
Red
CENTER SPEAKER
Green
SURROUND SPEAKERS (LEFT)
Blue
SURROUND SPEAKERS (RIGHT)
Gray
Before connecting the speaker cords;
Twist and pull the insulation coat off and remove.
Powered subwoofer
SP-PWS5
Front speakers
SP-THS5F
4 m
10 m
4 m
Copper
Red
Black
Silver
Surround speakers
SP-THS7S
(Bottom)
Route the speaker cord
through the hole on the
bracket.
This page is for
TH-S8S5[USUB].book Page 11 Friday, May 28, 2004 2:22 PM
