1-8 (No.YA382)
3.2.8 REMOVING THE SPEAKER (Fig.2)
• Remove the STAND.
• Remove the REAR COVER.
(1) Remove the 7 screws
[A]
, then remove the SPEAKER BOX.
(2) Remove the 4 screws
[B]
, then remove the SPEAKER (L/R).
(3) Remove the 4 screws
[C]
, then remove the DUCT(L/R).
NOTE:
Since the speaker is attached in a certain direction, attach
the speaker in the same correct direction as it has been at-
tached.
3.2.9 REMOVING THE LCD PANEL UNIT (Fig.2)
• Remove the STAND.
• Remove the REAR COVER.
• Remove the POWER CORD HOLDER.
• Remove the MAIN PWB.
• Remove the POWER PWB.
• Remove the DVB PWB.
(1) Remove the 10 screws
[D]
and 1 screw
[E]
, then remove
the MAIN BASE.
(2) Remove the 7 screws
[F]
, then remove the LCD PANEL
UNIT whit the TOP FRAME and BOTTOM FRAME.
(3) Remove the 4 screws
[G]
, then remove the TOP FRAME
and BOTTOM FRAME from the LCD PANEL UNIT.
3.2.10 REMOVING THE IR PWB (Fig.2)
• Remove the STAND.
• Remove the REAR COVER.
(1) Remove the 2 screws
[H]
, then remove the IR PWB.
3.2.11 REMOVING THE LED LENS (Fig.2)
• Remove the STAND.
• Remove the REAR COVER.
• Remove the IR PWB.
(1) Remove the 2 screws
[J]
, then remove the LED LENS.
