1-10 (No.YA382)
3.3
DISASSEMBLY PROCEDURE [LT-37SH6/A]
3.3.1 REMOVING THE STAND (Fig.3)
(1) Remove the 1 screw
[A]
, then remove the STAND COVER.
(2) Remove the 4 screws
[B]
, then remove the STAND.
3.3.2 REMOVING THE REAR COVER (Fig.3)
• Remove the STAND.
(1) Remove the JACK COVER (L/R).
(2) Remove the 8 screws
[C]
, the 3 screws
[D]
, the 2 screws
[E]
and
the 2 screws
[F]
.
(3) Remove the REAR COVER.
3.3.3 REMOVING THE POWER CORD HOLDER AND SD
CARD BASE (Fig.3)
• Remove the STAND.
• Remove the REAR COVER.
(1) Remove the 2 screws
[G]
, then remove the POWER
CORD HOLDER.
(2) Remove the 2 screws
[H]
, then remove the SD CARD BASE.
3.3.4 REMOVING THE MAIN PWB (Fig.3)
• Remove the STAND.
• Remove the REAR COVER.
(1) Remove the 6 screws
[J]
, then remove the MAIN PWB SHIELD.
(2) Remove the 3 screws
[K]
, then remove the TERMINAL BASE.
(3) Remove the 7 screws
[L]
, then remove the MAIN PWB.
3.3.5 REMOVING THE POWER PWB (Fig.3)
• Remove the STAND.
• Remove the REAR COVER.
(1) Remove the 5 screws
[M]
, then remove the FAN BRACKET.
(2) Remove the 6 screws
[N]
, then remove the POWER PWB.
3.3.6 REMOVING THE DVB PWB (Fig.3)
• Remove the STAND.
• Remove the REAR COVER.
(1) Remove the 3 screws
[P]
, then remove the TUNER BASE.
(2) Remove the 2 screws
[Q]
, then remove the DVB PWB SHIELD.
(3) Remove the 5 screws
[R]
, then remove the DVB PWB.
3.3.7 REMOVING THE KEY PWB (Fig.3)
• Remove the STAND.
• Remove the REAR COVER.
(1) Remove the 2 screws
[S]
, then remove the KEY PWB.
(2) Remove the 2 screws
[T]
, then remove the CONTROL ASS'Y.
