JVC LT-32HC1BU Instructions Manual Download Page 10

Page: 10 / 36

English

- 9 -

Viewing the Connections -
Side Connectors

CI Slot is used for

inserting a CI card.
A CI card allows
you to view all the
channels that you
subscribe to. For
more information,
see “Common
Interface” section.

Side USB input.

Note: Codec
update cannot be
performed.

Side HDMI Input

is for connecting a
device that has an

HDMI

connector.

Headphone jack is

used for connecting
an external
headphone to the
system. Connect to
the

HEADPHONE

jack to listen to the TV from headphones
(optional).

Video Input

(INPUT FAV) is used for connecting

video signals of external devices. Connect
the video cable between the

VIDEO IN

socket

on the TV and the

VIDEO OUT

jack on your

device.

Audio Inputs

(INPUT FAV) are used for

connecting audio signals of external devices.
Connect the audio cable between the

AUDIO

INPUTS

on the TV and the

AUDIO OUTPUT

jacks on your device. Note: If you connect a
device to the TV via the

VIDEO INPUT

, you

should also connect your device with an audio
cable to the

AUDIO INPUTS

of the TV to

enable audio.

Standby switch is used for turning the TV on

or off.

Side HDMI Connection

You can use side HDMI input to connect a device that
has an HDMI connector to your TV. Use

an appropriate HDMI cable to make such a connection.
Note that you should switch to HDMI-4 source to view
the content from the connected device. Power off both
the TV and the device

before making any connections.

• Side HDMI Input supports connections between

HDMI devices such as DVD players. You can use

INPUT AV

side HDMI input of the TV to connect to an external
HDMI device. Use an HDMI cable to connect.

HDMI DEVICE SIDE VIEW

Power Connection

IMPORTANT: The TV set is designed to operate on
220-240V AC, 50 Hz.

• After unpacking, allow the TV set to reach the

ambient room temperature before you connect the
set to the mains.

• Plug the power cable to the mains socket outlet.

Aerial Connection

• Connect the aerial or cable TV plug to the AERIAL

INPUT socket located at the rear of the TV.

Using the Cable Holder

You can use the supplied cable holder as the
following:

• Place the cable holder into the cable holder hole

located on the rear side of the TV as illustrated
above.

• Place cables into the cable holder after all necessary

connections are made.

A01_[GB]_SSM_MB36_MASKE_32882W_(RM-C2503-1C_UK)_IDTV_NICKEL7_10064678_50154964.indd 9

25.09.2009 17:49:18

Summary of Contents for LT-32HC1BU





































Search results

Summary of Contents for LT-32HC1BU

Reviews:

Related manuals for LT-32HC1BU

Brands by name

Popular brands

JVC LT-32HC1BU, Instructions Manual

Search results

Summary of Contents for LT-32HC1BU

Reviews:

Related manuals for LT-32HC1BU

Brands by name

Popular brands