- 19 -
When you are not watching TV, make sure the
TV is in stand by.
WARNING :
Do not turn off the main power. The timer func-
tion will not work with the main power switched
off.
The TV power lamp begins flashing before
the timer start time. When you are watching
TV at that time, a message appears on the
screen to inform you the timer is about to start.
When performing timer recording with a T-V
LINK compatible device, test the timer re-
cording before you record the programme.
There are some T-V LINK compatible record-
ing device that will not correctly receive the
Direct Rec command from the TV.
If the recording device does not operate when
the recording start time is reached, it means
VCR is not receiving the Direct Rec com-
mand from the TV. In this case, follow the
instructions of When recording on a T-V LINK
incompatible VCR:.
While the timer is in operation:
You can turn the TV on or off (Stand by).
WARNING: Do not turn off the main power.
You can watch analogue terrestrial broad-
casting channels or the pictures via an Ext
terminal.
Please note that any programme informa-
tion that appears on the screen, such as when
making changes to the Digital terrestrial
broadcasting (DVB-T) channel picture, will
be superimposed over the picture in the VCR
recording.
When you press the following buttons ( ,
AV, MENU,
(SUBTITLE), GUIDE,
,
BACK,
/
,
number buttons) dur-
ing recording, a message appears ask-
ing if you want to stop recording or not.
Press
OK
button to stop recording or BLUE
button to continue recording.
Cancelling the timer setting
Display the TIMER MENU and press the
/ buttons to choose which timer setting
to cancel. Press the / buttons so
that Inactive appears in the Mode column.
Reactivating the cancelled timer
setting
Display the TIMER MENU and press the
/ buttons to choose which timer setting
to reactivate. Press the / buttons so
that Active appears in the Mode column.
Configuration
Set the basic setting when watching Digital
terrestrial broadcasting (DVB-T).
Choose configuration and press the
OK
but-
ton.
CONFIGURATION appears.
f
f
e
e
0HQX
$QWHQQDSRZHU
9
When the BACK button is pressed, the previ-
ous screen is returned to. When MENU but-
ton is pressed, the menu disappears.
When the
(Information) button is pressed,
the help screen appears. When it is pressed
again, the previous screen is returned to.
MENU
When the Configuration menu is entered,
MENU is highlighted. Use left or right buttons
to change language between English or Ger-
man.
MENU Language determines the on-screen
menu language.
Audio Language
With Digital terrestrial broadcasting (DVB-T),
a number of languages can be broadcast at
the same time. Choose language you want to
listen when watching these broadcasts.
1.
Press the / buttons and choose
Audio Language.
01-ENG-(LT-32DF7BC)-32775-17MB15-C1897S UK-PEU IDTV-OEM-(ECO-PIP)-10044394-50093075.p65
30.10.2006, 13:38
19
