EN
12
On-screen Language Selection
1
Press
MENU.
Then press
◀
or
▶
to select
“Setup”, then press
ENTER
.
OSD Language
Setup
Picture
Audio
TV
Setup
Lock
English
Blue Screen
Time Setup
Subtitle
Off
Aspect Ratio
Auto
2
Press
▲
or
▼
to select “OSD Language”, then
press
◀
or
▶
to select the desired language.
3
Press
RETURN
to exit the menu.
Station search
Warning! All previously saved DVB-T channels
are deleted in Step 3. A new channel search
then starts automatically.
Preparation:
Make sure your antenna is connected to the
antenna input (see P.10). Select an appropriate
input mode. (See page 11). Then press
MENU
.
1
Press
◀
or
▶
to select “TV”, then press
ENTER
.
Press
▲
or
▼
to select “Tuner Mode”.
Press
◀
or
▶
to select “Antenna” or “Cable” .
2
Press
▲
or
▼
select “Channels”, then press
▶
or
ENTER
.
3
Press
▲
or
▼
select “Channel Scan”, then
press
▶
or
ENTER
.
Press
◀
or
▶
to select desired country, then
press
ENTER
.
Channel Scan
Channels
Picture
Audio
TV
Setup
Lock
Analogue Manual Scan
Digital Manual Scan
Channel Skip
Channel Sort
4
The Channel Scan will search for available TV-
channels and store the channels in the correct
order.
Cable :
Search for Digital and Analogue channel.
You can select this option “Scan Mode: Quick/
Advance/Full”, then press
▲
or
▼
to select
“Scan” and press
▶
or
ENTER
.
Note:
Quick:
If TV find a channel of NIT1 (Network
Information Table), it will find all other
channels in NIT1. Don’t scan for the channels
of other NIT. (only for Germany, Finland and
Norway)
Full:
TV will find all the channels of NIT1,
NIT2, NIT3...
Advance:
Define a frequency. Only search
channel in this frequency.
•
•
•
Scan Mode
Advance
Channel Scan
Picture
Audio
TV
Setup
Lock
Select
0%
Scan All Channels.
Frequency (KHz)
Scan
306000
Antenna:
Search for Digital and Analogue
channel.
Channel Scan
Picture
Audio
TV
Setup
Lock
6%
Status: Scanning...
Digital Channels: 7
Analogue Channels: 0
5
When TV programme have been stored 100%,
return to normal TV screen automatically.
Manual Channel Scan
Preparation:
Select “Analogue Manual Scan” or “Digital Manual
Scan” in Step 3 of Station search.
Analogue Manual Scan
Press
▲
or
▼
to select “Scan Up” or “Scan Down” to
start searching. Then press
▶
or
ENTER
.
Digital Manual Scan
Select RF Channel that you want to setup, then
press
ENTER
to start searching.
You can verify the signal strength and quality of
the selected service here. If necessary, adjust
the direction of the DVB-T antenna to obtain the
maximum signal strength.
J3MW0401A_EN.indd 12
J3MW0401A_EN.indd 12
10/26/12 4:42:45 PM
10/26/12 4:42:45 PM
