- 27 -
Treble
By pressing
a
/
b
button, select
Treble.
Press
_
/
`
buttons to change Treble level.l
Hyper Sound
You can use this feature to switch the sound
effect on or off. If the current sound system is
Mono and the sound effect is switched on,
then the sound will be heard as if it is Stereo.
If the current sound system is Stereo, switch-
ing this effect on will give a more spatial effect.
Pressing
_
/
`
button will turn this feature on
or off.
Feature menu
By pressing
_
/
`
button, select the third icon.
Feature menu appears on the screen.
)($785(
6OHHS7LPHU
&KLOG/RFN
/DQJXDJH
([W2XW
'HIDXOW=RRP
2II
2II
(QJOLVK
79
3DQRUDPLF
%OXH%DFN
2Q
Sleep Timer
By pressing
a
/
b
button, select
Sleep Timer.
The timer can be programmed between Off
and 2 hours in steps of 10 minutes by press-
ing
_
/
`
button. If sleep timer is activated, at
the end of the selected time, the TV automati-
cally goes into stand-by mode.
Child Lock
You can use this feature to prevent children
from turning the TV on or changing prog-
rammes or adjustments etc. without remote
control.
The child lock feature can be set by
_
/
`
button
to either
On
or
Off
. When
Off
is selected, there
will be no difference in the operation of your
TV. When
On
is selected, the TV can only be
controlled by the remote control handset. In
this case the control panel buttons, except the
Power on/off button, at the rear side of the TV
will not work. If one of these buttons is pressed,
Child Lock On will be displayed on the
screen.
Language
By pressing
a
/
b
button, select
Language.
By pressing
_
/
`
button, you can select the
language.
Ext-2 Out
By pressing
a
/
b
button, select
Ext-2 Out.
You can set
Ext-2 Out
to
TV, EXT-1, EXT-4
,
Monitor
or
Digital
by pressing
_
/
`
button.
When
Monitor
option is selected, it will auto-
mate EXT-2 options.
Ext-2 Out follows currently selected source.
Note: Audio output also follows EXT-2 out set-
ting. If you choose Monitor and input source is
other than TV, EXT-1, EXT-4 or Digital,only Au-
dio output is available.
Default Zoom
By pressing
a
/
b
button, select
Default
Zoom.
You can set
Default Zoom
to
Pan-
oramic, Regular
or
14:9 Zoom
by pressing
_
/
`
button.
If there is no WSS or aspect ratio (picture size)
information and zoom mode is selected as
Auto
by pressing the
ZOOM
button, then the
zoom mode will automatically change to De-
fault Zoom setting. See also Zoom Modes
section
Blue Back
By pressing
a
/
b
button, select
Blue back.
You can change Blue Back to
On
or
Off
by
pressing
_
/
`
button.
Install menu
By pressing
_
/
`
button, select the fourth icon.
Install menu appears on the screen.
ENG-26775W-17MB15-1895UK-(LT-26DF7BK)-(CMOTN)-10048944-50105753-rev01.p65
08.06.2007, 16:19
27
