JVC LT-26DA8BJ, Instructions Manual

Page: 31 / 31

57 58
Services have changed.
Do you want to update PR list?
Yes No
IMPORT
ANT!
PREP
ARE
USE
SETTINGS
TROUBLE?
Main unit
Terminals / Connectors

A CAM (Conditional Access Module) for watching pay-TV digital channels can be installed (P.8).

DC power can be supplied to the indoor aerial (P.55).
Model LT-26DA8BJ LT-32DA8BJ LT-37DA8BJ
Broadcasting systems CCIR I
Colour systems
TV broadcast : PAL
External input : PAL, NTSC 3.58/4.43 MHz
Channels and frequencies

Digital : E21-E68 (Frequency : 474 MHz-850 MHz)

Analogue :
UNITED KINGDOM : E21-E69 (UHF)
IRELAND : IR A-IR J, E2-E12, E21-E69 (VHF/UHF)
Sound-multiplex systems NICAM (I)
Teletext systems
Digital : MHEG 5 UK profile
Analogue : FLOF (Fastext), WST (World Standard System).
Power requirements AC 220 V - 240 V, 50Hz
Audio output (Rated power output) 5 W + 5 W
Speakers
(12 cm x 5 cm) oval x 2
Power consumption
[standby]
116 W
[1.6 W]
125 W
[1.6 W]
170 W
[1.6 W]
Screen size
(visible area size measured diagonally) 66 cm
80 cm 92 cm
Dimensions (W x H x D: mm)
[without stand]
672 x 519 x 230
[672 x 471 x 107]
800 x 591 x 230
[800 x 545 x 99]
919 x 651.7 x 230
[919 x 603.7 x 108]
Weights
[without stand]
11.6 kg
[10.8 kg]
14.3 kg
[13.5 kg]
19.8 kg
[18.7 kg]
Accessories (See “Check accessories”, P. 5)

We may change the design and specifications without notice.
Terminal name Terminal type Signal type (IN) Signal type (OUT) Notes
Input / Output
terminals
EXT-1
Euroconnector x 1
(SCART connector)
Composite video,
Analog RGB
AUDIO L / R
TV out
EXT-2
Euroconnector x 1
(SCART connector)
Composite video, S-video,
Analog RGB
AUDIO L / R
Dubbing out
“T-V LINK”
compatible
Input terminals
EXT-3 RCA connectors x 5
Composite video,
Analogue component
(576i (625i) / 480i (525i),
Progressive : 576p (625p) / 480p (525p),
HD : 1080i (1125i), 720p (750p))
AUDIO L / R
EXT-4 (HDMI 1)
HDMI connector x 1
HDMI
(576i (625i) / 480i (525i) /
576p (625p) / 480p (525p),
1080i (1125i), 720p (750p))
EXT-5 (HDMI 2)
Output
terminals
DIGITAL
AUDIO OUT
OPTICAL connector x1
Digital audio
(48 kHz,16 bit
linear PCM /
Dolby Digital)
Headphone
Stereo mini-jack x 1
(3.5 mm in diameter)
Headphone
output
Specifications
The TV will run the reception test (for digital channel) at midnight (3AM) on a daily basis.
If the TV detects channels that became receivable or if the TV was not able to receive a certain channel, a
message about updating the PR list will be displayed when the TV is turned on.

The reception test will only operate when the TV is in standby. It will not operate when the TV is turned on.

If the TV does not detect any channels that needs to be updated, a message will not be displayed.
Updating the PR list (Digital channel only)

To update the PR list
1. Select “Yes” and press the OK button.
2. “Service Scan” menu is displayed.
Run the service scan to update the PR list

”Service Scan” (P. 43).

If “Reinstall” is set in “Mode” of “Service Scan” menu, All PR list setting will reset and all the reservations for
“Record” and “Remind” will be cancelled. If you want to leave those settings and just add channels, set the
“Mode” of “Service Scan” menu to “Add” (P. 43).

If “Add” is set in “Mode” of “Service Scan” menu, channels which the TV couldn’t receive will not be deleted from
the PR list. To delete those channels manually

”Edit PR list” (P. 45).

The service scan will take few minutes.

To cancel the update
Select “No” and press the OK button.

If you want to update the PR list later, select “No” and press the OK button. Next time you turn on the TV this
message will not be displayed but you can also update the PR list using “Service Scan” (P. 43).
Technical information
(continued)
57-58 1/25/2007 3:09:02 PM