- 43 -
PC Picture
If no PC picture appears, check that the D-
SUB cable is connected properly. Check that
your PCs resolution set correctly.
See pages
42
for supported modes.
Sound
You can not hear any sound. Did you perhaps
interrupt the sound, pressing button? Are
external speakers connected to the TV?
Sound is coming from only one of the speak-
ers. Is the balance set to one direction ex-
treme? See
Sound
menu.
Remote Control
If your TV no longer responds to the remote
control, perhaps the batteries are exhausted.
Replace the batteries.
Have you selected the wrong menu? Press
MENU
button to return to normal screen or
press
BACK
button to return to the previous
menu.
No solution
If the TV suddenly stops responding, discon-
nect the power cord of the TV from the AC out-
let. Connect themto the AC outlet again to turn
on the TV. If the TV returns to a normal state, it
is not a failure. If this does not work, switch off,
remove the mains plug and call the service
personnel; never attempt to repair it yourself.
Bad picture (in digital mode)
Although this TV can receive both Digital ter-
restrial broadcasting (DVB-T) and Analogue
terrestrial broadcasting, you may not be able
to receive DVB-T depending on the area in
which you live.
If the picture freezes a lot, or block effect is
seen frequently on screen, probably there is a
problem with your reception.
Please contact customer services of your ser-
vice provider if you are a subscriber.
Tips
Can not turn the TV on?
Check that TV/VCR/DVD switch is set to TV
position.
TV may go to stand-by mode when you turn
the TV on soon after you turn the TV off. If you
can turn the TV on again, it is not a problem.
Can not turn the TV off?
Check that TV/VCR/DVD switch is set to TV
position.
Care of the Screen
Clean the screen with a slightly damp, soft
cloth. Do not use abrasive solvents as they
may damage the TV screen coating layer.
Colours of image on screen are
abnormal
Have you selected the correct TV system? Is
your TV set or house aerial located too close
to the loudspeakers, non-earthed audio equip-
ment or neon lights, etc. ?
Mountains or high buildings can cause double
pictures or ghost images. Sometimes you can
improve the picture quality by changing the
direction of the aerial.
Is the picture or Teletext unrecognisable?
Check if you have entered the correct frequency.
The picture quality may degrade when two
peripherals are connected to the TV at the
same time. In such a case, disconnect one of
the peripherals.
No Image on Display Screen
Is the aerial connected properly? Are the plugs
connected tightly to the aerial socket? Is the
aerial cable damaged? Are suitable plugs
used to connect the aerial? If you are in doubt,
consult your dealer.
No Image
means that your TV is not receiving
any transmission. Have you pressed the cor-
rect buttons on the remote control? Try once
more.
01-ENG-20710-17MB16P-C1897S UK-(LT-20DJ5SFR)-(TVAVOK)-IDTV-10041701-50088870.p65 05.06.2006, 08:44
43
