JVC LT-20DA6SK, Instructions Manual

Page: 37 / 47

- 36 -
Auto Position
If you shift the picture horizontally or vertically
to an unwanted position, use this item to put
the picture into correct place automatically.
• Select Auto position item by using “ ” or
“ ” buttons.
• Press “
OK ” button.
• Press “ MENU ” button or “ BACK ” button to
store the value.
Warning: Auto position adjustment recom-
mended to be done with the full screen im-
age for the proper adjustment.
Horizontal Position
This item shifts the image horizontally to
right hand side or left hand side of the
screen.
• Select
Hor. Position item by using “ ” or
“ ” button.
• Use “ ” or “ ” button to adjust the value.
• Press “
MENU ” button or “ BACK ” button to
store the value.
Vertical Position
This item shifts the image vertically towards
the top or bottom of the screen.
• Select
Ver. Position item by using “ ” or
“ ” button.
• Use “ ” or “ ” button to adjust the value.
• Press “
MENU ” button or “ BACK ” button to
store the value.
Dot Clock
Dot Clock adjustments correct interference
that appear as vertical banding in dot inten-
sive presentations like spreadsheets or
paragraphs or text in smaller fonts.
• Use “ ” or “ ” button to adjust the value.
Clock Phase
Depending on the resolution and scan fre-
quency that you input to the TV Set, you may
see a muddy or noisy picture on the screen.
In such a case you can use this item to get a
clear picture by trial and error method.
• Use “ ” or “ ” button to adjust the value.
PC Picture Menu
In the Main menu, select “ PC Picture ” using
“ ” or “ ” button, then enter the PC Picture
menu by pressing “ ” / “ ” or “
OK ” buttons.
Contrast, Bright-1 and Colour Temperature
adjustments in this menu are identical to
adjustments defined in TV picture menu.
R, G, and B adjust the TV image colour in
PC mode. You can change the TV colour to
your desired colour: R (Red), G (Green), B
(Blue)
Sound Menu
In the main menu select “ Sound ” using “ ”
or “ ” button then enter the Sound menu by
pressing “ ” / “ ” or “
OK ” buttons.
The items in this menu are described at
Sound menu starting page 29 .
PIP Picture
In the Main menu, select “ PIP Picture ” using
“ ” or “ ” button, then enter the PIP Pic-
ture menu by pressing “ “ / “ ” or “
OK ” but-
tons.
This menu is displayed when PIP is dis-
played on the screen. Otherwise “PIP No
Signal” message will be displayed at the
bottom of menu.
3,33LFWXUH
&RQWUDVW
%ULJKW
&RORXU
6KDUSQHVV
5(6(7
3,36L]H
3,33RVLWLRQ
PIP picture is displayed on the screen by
“
” button.
ENG-20710W-17MB16P-1895UK-(LT-20DA6SK)-50076128.p65 18.10.2005, 08:39 36