34
ENGLISH
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
INSTALLATION/CONNECTION
Part list for installation
Basic procedure
1
Remove the key from the ignition switch, then disconnect the
terminal of the car battery.
2
Connect the wires properly.
See Wiring connection.
( 35)
3
Install the unit to your car.
See Installing the unit (in-dash mounting).
4
Connect the terminal of the car battery.
5
Press
to turn on the power.
6
Reset the unit. ( 3)
Use only the specified screws. Using wrong screws might
damage the unit.
Installing the unit (in-dash mounting)
Install onto the car brackets using the supplied screws
(C)
or
(D)
. The screw holes differ depending on the model
of the cars. Then, install the supplied trim plate
(A)
.
(B)
Wiring harness
(A)
Trim plate
(C)
Flat head screw
M5 × 8 mm
(D)
Round head screw
M5 × 8 mm
Do the required wiring.
( 35)
Dashboard of your car
Car bracket
Installing in Toyota cars
Install onto the car brackets using the supplied screws
(C)
or
(D)
.
Use the mounting holes (
) or (
) that fit the car brackets.
JS_JVC_KW_R930BT_M_EN_4.indd 34
JS_JVC_KW_R930BT_M_EN_4.indd 34
7/26/2017 3:35:55 PM
7/26/2017 3:35:55 PM
