background image

12

Data Size: 

B6L (182 mm x 128 mm)

Book Size: 

B6L (182 mm x 128 mm)

TROUBLESHOOTING

Symptom

 Remedy

Sound cannot be heard.

•  Adjust the volume to the optimum level.
•  Check the cords and connections.

“MISWIRING CHK WIRING 
THEN RESET UNIT”  / 
“WARNING CHK WIRING THEN 
RESET UNIT”  appears and no 
operations can be done.

  Check to be sure the terminals of the speaker wires are 

insulated properly, then reset the unit. If this does not 
solve the problem, consult your nearest service center.

Source cannot be selected.

  Check the 

[SRC SELECT]

 setting. 

(  4)

Radio reception is poor. / 
Static noise while listening to 
the radio.

•  Connect the antenna firmly.
•  Pull the antenna out all the way.

Correct characters are not 
displayed.

  This unit can only display uppercase letters, numbers, and 

a limited number of symbols.

“PLEASE” and “EJECT” appear 
alternately.

 Press  , then insert the disc correctly.

“IN DISC” appears.

  Make sure nothing is blocking the loading slot when you 

eject the disc.

Disc cannot be ejected.

  Press and hold   to forcibly eject the disc. Be careful not 

to drop the disc when it is ejected.

Playback order is not as 
intended.

  The playback order is determined by the file name (USB) or 

the order in which files were recorded (disc).

Elapsed playing time is not 
correct.

  This depends on the recording process earlier.

“NOT SUPPORT” appears and 
track skips.

  Check whether the track is a playable format. 

(  11)

Symptom

 

Remedy

“CANNOT PLAY” flashes 
and/or connected device 
cannot be detected.

•  Check whether the connected device is compatible with this 

unit and ensure the files are in supported formats. 

(  11)

•  Reattach the device.

“READING” keeps flashing. •  Do not use too many hierarchical levels and folders.

•  Reload the disc or reattach the USB device.

If you still have troubles, reset the unit. (  3)

JS_JVC_KW_R515_U_EN_1.indd   12

JS_JVC_KW_R515_U_EN_1.indd   12

4/7/2014   12:44:17 PM

4/7/2014   12:44:17 PM

Summary of Contents for KW-R515

















Reviews: