9
ENGLISH
Installation settings
When you turn on the unit for the first time, the initial
setup screen appears.
1
Turn on the ignition switch.
The power is turned on, and the startup screen is
displayed for about 5 seconds.
2
Select the language you want for the display
and the voice guidance.
• You can also select the system language through
the AV menu (<
Settings
> - <
System
> -
<
Language
>,
☞
page 75)
3
Display installation settings screen.
• If you select [
Skip Installation Settings (for
Store Display)
], the System starts in the store
display mode.
You need to make the installation settings next
time you turn on the power.
– When you turn on the power, <
Select
Language
> appears. After selecting
the language, the confirmation message
appears. Press [
Yes
] so that the System starts
initialization. When initialization is complete,
<
Select Language
> (
☞
Step
2
above) is
displayed.
4
Adjust the settings.
State/
Province
Select the State or Province where
you are now.
Time Zone
*
Select your residential area for
automatic clock adjustment by
GPS signal.
DST
*
Select <
Auto
> if your residential
area is subject to Daylight Saving
Time.
Reverse
Signal
Polarity
*
Select the reverse signal polarity
(<
Battery
> or <
GND
>)
according to the connection of
your car.
Camera
Input
*
Select <
On
> when connecting
the rear view camera to the
CAMERA IN jack.
*
You can also change these settings through the AV
menu (<
Settings
>,
☞
page 75).
5
EN_KW-NT30_50[J].indb 9
EN_KW-NT30_50[J].indb 9
2/3/2011 9:27:33 AM
2/3/2011 9:27:33 AM