JVC KW-NT300, Instruction Manual

Page: 11 / 368

11
ENGLISH
Basic operations Installation settings
When you turn on the unit for the first time, the initial
setup screen appears.
1
Turn on the ignition switch.
The power of the unit is turned on.
2
Select the language you want for the display
and the voice guidance.
• You can also select the system language through
< Settings > - < System > - < Region > -
< Language >. (
☞
page 82)
3
Set the installation settings (
1
), then press
[OK] (
2
).
State/
Province Select the State or Province where
you are now.
Time Zone * Select your residential area for
automatic clock adjustment by
GPS signal.
DST * Select [ Auto ] if your residential
area is subject to Daylight Saving
Time.
Camera
Input
*
Select [ On ] when connecting the
rear view camera to the CAMERA
IN jack.
* You can also change these settings through
<
Settings > - < System >. (
☞
page 83, 84)
Turning on the power
Turn on the ignition switch.
• When displaying the map screen for the first time
after turning on the power, the screen below
appears. Press [
OK ] to use the map screen.
• The power is turned off when the ignition switch is
turned off.
Turning off/on the screen
Press and hold to turn the screen off.
Touch the screen to turn it on again.
• You can erase the clock display while the screen is
turned off. (< Clock on Video/Screen-Off >,
☞
page 83)