1-14 (No.MA403<Rev.001>)
SECTION 3
DISASSEMBLY
3.1
Main body (Used figure are KW-AVX810E)
3.1.1 Removing the Front chassis (See Fig.1 to 5)
(1) Press
D
button, remove the Front panel. (See Fig.1)
(2) From the bottom side of main body, insert screwdriver to
hole of the third gear from hole a of the bottom chassis, and
the turn the gear to clockwise until Front bracket comes up.
(See Fig.2)
(3) Remove the two screws
A
attaching the both side of Front
bracket. (See Fig.3)
(4) Remove the three screws
B
attaching the FPC cover. (See
Fig.4)
(5) Disconnect the card wires from Front bracket connected to
connector
CN803
and
CN804
of the Panel board. (See
Fig.5)
(6) Remove the four screws
C
attaching the both side of Front
chassis. (See Fig.3)
(7) Disengage two hooks
a
engaged both side of Front chas-
sis. (See Fig.3)
Fig.1
Fig.2
Fig.3
Fig.4
Fig.5
D button
hole
a
A
hook
a
C
B
CN803
CN804
