background image

27

ENGLISH

To set the clock display—CLOCK

You can set the clock to be shown on the display
when the unit is turned on.
When shipped from the factory, the clock is set to
be shown on the display.

• ON:

Clock display is turned on.

• OFF:

Clock display is turned off. When
“OFF” is selected, the other
information (see table below)
appears instead of the clock
display (except when “LINE IN” is
selected as the source).

When CLOCK is set to OFF:

Source

Initial

Pressing D (DISP)

indication

Tuner

Band

(FM/AM/
DAB)

TAPE

“TAPE” or

or

disc number

CD-CH

When CLOCK is set to ON:

Source

Initial

Pressing D (DISP)

indication

Tuner

Clock

Band appears for about

(FM/AM/

5 seconds.

DAB)

TAPE

Clock

“TAPE” appears for
about 5 seconds.

CD-CH

Clock

Disc number and track/
file number appear
alternately each time
you press the button.

To select the level meter—LEVEL

You can select the level meter display according
to your preference.
When shipped from the factory, “AUDIO 2” is
selected.

• AUDIO 1:

Shows the audio level indicator.

• AUDIO 2:

Alternates “AUDIO 1” setting and
illumination display.

• OFF:

Erases the audio level indicator.

To select the dimmer mode—DIMMER

When you turn on the car headlights, the display
automatically dims (Auto Dimmer).
When shipped from the factory, Auto Dimmer
mode is activated.

• AUTO:

Activates Auto Dimmer.

• OFF:

Cancels Auto Dimmer.

• ON:

Always dims the display.

Note:

Auto Dimmer equipped with this unit may not work
correctly on some vehicles, particularly on those
having a control dial for dimming.
In this case, set the dimmer mode to “ON” or “OFF.”

To select the telephone muting—TEL

This mode is used when a cellular phone system
is connected. Depending on the phone system
used, select either “MUTING 1” or “MUTING 2,”
whichever mutes the sounds from this unit.
When shipped from the factory, this mode is
deactivated.

• MUTING 1: Selects this if this setting can mute

the sounds while using the cellular
phone.

• MUTING 2: Selects this if this setting can mute

the sounds while using the cellular
phone.

• OFF:

Cancels the telephone muting.

Clock appears for about
5 seconds.

EN25-29KS-LH60R[E_EX]f.p65

3/7/03, 7:10 PM

27

Summary of Contents for KS-LH60R

















































Reviews: