JVC KD-X320BTS, Instruction Manual

Page: 19 / 36

ENGLISH
17
DIAL NUMBER 1 Turn the volume knob to select a number (0 to 9) or character ( , #,
+).
2 Press to move the entry position.
Repeat steps
1
and
2
until you finish entering the phone number.
3 Press the volume knob to call.
VOICE Speak the name of the contact you want to call or the voice command to
control the phone functions.
( Make a call using voice recognition )
Make a call using voice recognition
1
Press and hold to activate the connected phone.
2
Speak the name of the contact you want to call or the voice
command to control the phone functions.
• Supported Voice Recognition features vary for each phone. Refer to the
instruction manual of the connected phone for details.
• This unit also supports the intelligent personal assistant function of
iPhone.
Delete a contact
1
Press to enter Bluetooth mode.
2 Turn the volume knob to select [ RECENT CALL ], then press the knob.
3 Turn the volume knob to select a contact.
4 Press and hold to enter delete mode.
5
Turn the volume knob to select [ DELETE ] or [ DELETE ALL ], then press
the knob.
DELETE : Selected name or phone number in step
3
is deleted.
DELETE ALL : All names or phone numbers in [ RECENT CALL ] in step
2
is
deleted.
6 Turn the volume knob to select [ YES ], then press the knob.
• To return to the previous setting item, press .
• Not applicable for mobile phone that supports PBAP.
BLUETOOTH®
Settings in memory
Store a contact in memory
You can store up to 6 contacts into the number buttons (
1
to
6
).
1 Press to enter Bluetooth mode.
2 Turn the volume knob to select [ RECENT CALL ], [ PHONEBOOK ], or
[ DIAL NUMBER ], then press the knob.
3
Turn the volume knob to select a contact or enter a phone number.
If a contact is selected, press the volume knob to show the phone
number.
4
Press and hold one of the number buttons (
1
to
6
).
“MEMORY P(selected preset number)” appears when the contact is
stored.
To erase a contact from the preset memory, select [ DIAL NUMBER ] in step
2
and store a blank number.
Make a call from memory
1 Press to enter Bluetooth mode.
2 Press one of the number buttons (
1
to
6
).
3 Press the volume knob to call.
“NO PRESET” appears if there is no contacts stored.
Bluetooth mode settings
1
Press and hold .
2
Turn the volume knob to select [ BLUETOOTH ], then press the knob.
3
Turn the volume knob to make a selection ( 18) , then press the
knob.
4 Repeat step 3 until the desired item is selected/activated or follow
the instructions stated on the selected item.
5 Press to exit.
To return to the previous setting item, press .
JS_JVC_KD_X320BTS_J_EN_2.indd 17 11/9/2014 4:57:57 PM