14
ENGLISH
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
Bluetooth®
• This unit supports Secure Simple Pairing (SSP).
• Up to five devices can be registered (paired) in total.
• Once the pairing is completed, the Bluetooth device will remain registered
in the unit even if you reset the unit. To delete the paired device, see
[DEVICE DELETE]
on page 17.
• A maximum of two Bluetooth phones and one Bluetooth audio device can
be connected at any time. To connect or disconnect the registered device,
see
[PHONE SELECT]
or
[AUDIO SELECT]
in
[BT MODE]
. (Page 17)
However, while in BT AUDIO source, you can connect to five Bluetooth
audio devices and switch between these five devices. (Page 19)
• Some Bluetooth devices may not automatically connect to the unit after
pairing. Connect the device to the unit manually.
• When the battery of the connected Bluetooth device runs low, “Device
Name” “LOW BATTERY” appears.
• Refer to the instruction manual of the Bluetooth device for more
information.
Auto Pairing
(for KD-X482BT)
When you connect iPhone/iPod touch to the USB input terminal, pairing
request (via Bluetooth) is automatically activated if
[AUTO PAIRING]
is set to
[ON]
. (Page 17)
Press the volume knob to pair once you have confirmed the device name.
Bluetooth — Mobile phone
Receive a call
When there is an incoming call:
• KD-X482BT:
The buttons will blink in the color you have selected in
[RING COLOR]
.
(Page 16)
KD-X282BT:
The buttons will blink in the blinking pattern you have selected in
[RING ILLUMI]
. (Page 16)
• The unit answers the call automatically if
[AUTO ANSWER]
is set to a selected
time. (Page 16)
During a call:
• KD-X482BT:
The buttons stop blinking and illuminate in the color you have selected in
[RING COLOR]
. (Page 16)
KD-X282BT:
The buttons stop blinking.
• If you turn off the unit or detach the faceplate, Bluetooth is disconnected.
KD-X482BT_M_B5A-3846-00_EN_1st Draft.indd 14
KD-X482BT_M_B5A-3846-00_EN_1st Draft.indd 14
21/9/2021 12:44:58 AM
21/9/2021 12:44:58 AM
